Installer Setting - Setting Address Of Central Control; Installer Setting - E.s.p - LG PQRCVSL0 Owners & Installation Manual
New wide wired remote controller for air conditioner
Hide thumbs
Also See for PQRCVSL0:
- Owners & installation manual (34 pages) ,
- Installation manual (23 pages) ,
- Owner's manual (239 pages)
Table of Contents
Advertisement
Installation Instructions
Installer Setting - Setting Address of Central Control
It's the function to use for connecting central control.
Please refer to central controller manual for the details
12 New Wide Wired Remote Controller
1
Pressing and holding the
button
for 3 seconds enters the remote
controller setup mode. If it is not held
for 3 seconds, it enters the user
setup mode.
If entering into address setup mode by using
2
button, it indicates as pictured below.
Indoor No.
Group No
Function Code
Set Group No. by pressing
3
button.(0~F)
Move to Indoor No. setting option
4
by pressing
button.
5
Set Indoor No. by pressing
button.
Press
button to save.
6
7
Pressing the
button will exit the settings
mode. If
is not pressed, the remote
controller will automatically exit setup mode
after 25 seconds with no input. If the set
button is not pressed, the changes will not
take effect.
Installer Setting - E.S.P.
This function allows the wind strength for each fan speed level to be set manually.
• If ESP is set incorrectly the air conditioner may malfunction, which is why this setting should only be
done by a certified technician.
Function code,
ESP code
ESP value
• When setting ESP value on the product without very weak wind or power wind function, it
may not work.
Installation Instructions
1
Pressing and holding the
button for 3 seconds enters the
remote controller setup mode. If it
is not held for 3 seconds, it enters the
user setup mode.
If entering into ESP setup mode by using
2
button, it indicates as pictured below.
ESP step
Function Code
ESP value
Select ESP fan step by pressing
3
button. (01: very low, 02: low,
03: medium, 04: high, 05: very high)
4
Move to ESP value setting by pressing
button.
(It is 000 when delivered
from the warehouse.)
Press
button to setup ESP value.
5
(It is possible to set up ESP
value from 1 to 255, and 1 is
the smallest and 255 is the
biggest.)
Owner's & Installation Manual 13
Hide quick links:
Advertisement
Table of Contents
