Ventilation Product Function Settings; Ventilation Product Reservations Settings - LG PQRCVSL0 Owners & Installation Manual
New wide wired remote controller for air conditioner
Hide thumbs
Also See for PQRCVSL0:
- Owners & installation manual (34 pages) ,
- Installation manual (23 pages) ,
- Owner's manual (239 pages)
Table of Contents
Advertisement
Owner's Instructions
Ventilation Product Function Settings
68 New Wide Wired Remote Controller
Delay Time : It operates after delay time in
ventilation operation.
Press
Settings button.
1
2
Pressing
button repeatedly will move to the delay
time menu. Then delay time icon is displayed, and the
delay time blinks at the perature display area.
3
Pressing
button will
change the delay time settings.
❈ Boundary of delay time
settings : 00 ~ 60 minutes
(in the units of 1 minute)
When the desired delay time is
4
displayed, press
button to
finish the settings.
5
Pressing the
button will exit the
settings mode. If
is not
pressed, the remote controller
will automatically exit setup mode
after 25 seconds with no input. If the set
button is not pressed, the changes will not
take effect.
Lock, Filter Cleaning, Time Setting,
Converting Temperature
C Refer to 'Function Settings - Lock Settings' part for
lock function.
C Refer to 'Function Settings - Filter Cleaning Display
Release' part for Filter Cleaning function.
C Refer to 'Function Settings - Time Settings' part for
Time Setting function.
C Refer to 'Function Settings - Temperature
Conversion' part for Temperature Conversion
function.
Ventilation Product Reservations Settings
1
2
3
4
5
6
Simple, ON, OFF, Weekdays, Holidays Reservations
C Please refer to the Reservation Settings part of the air conditioner for
Owner's Instructions
Sleep Reservations : Sets to operate ventilation
lightly during the sleep.
Press
button to enter the
reservation settings mode.
Press
button again to move to Sleep.
'Sleep' icon blinks and the reservation time is
displayed.
Use
button to set the
reservation time.
Reservation time can be set
between 1 ~ 12 hours.
When Sleep reservation setting is
finished, press
button.
Pressing the
button will exit the
settings mode. If
is not
pressed, the remote controller will
automatically exit setup mode after
25 seconds with no input. If the set button is
not pressed, the changes will not take effect.
- When the reservation is cancelled, 'Sleep'
mark disappears.
When the sleep reservation setting is finished,
it operates lightly for the set time.
Simple, ON, OFF, Weekdays, Holidays Reservations
Owner's & Installation Manual 69
Hide quick links:
Advertisement
Table of Contents
