Programming - Sleep Reservation; Programming - On Reservation - LG PQRCVSL0 Owners & Installation Manual
New wide wired remote controller for air conditioner
Hide thumbs
Also See for PQRCVSL0:
- Owners & installation manual (34 pages) ,
- Installation manual (23 pages) ,
- Owner's manual (239 pages)
Table of Contents
Advertisement
Owner's Instructions
Programming - Sleep Reservation
Sleep reservation is the function of air-conditioner to run and stop after a certain period of time at
sleep mode before sleep. When connected to a ventilation product and set the sleep reservation,
when it goes to the sleep mode, after the set time has elapsed.
CAUTION
Please reserve proper time at sleeping. (Too much air-cooling is not good for your health.)
• Because it automatically adjusts desired temperature for comfortable air-cooling at sleep drive,
there could be difference between remote controller's desired temperature and air-conditioner
body's desired temperature.
• Sleep reservation operates as off reservation for the product whose temperature adjustment is not
controlled by unit of 0.5℃(1℉).
54 New Wide Wired Remote Controller
1
Press
button to enter the
Programming mode.
Ex) Setting Sleep Reservation
time as '3'.
Press the
button until the
2
segment flashes.
3
Press
button to adjust reservation
time.
The SLEEP reservation time is from 1 to
7 hours.
4
Press
button to finish setting.
Whenever reservation is done.
5
Pressing the
button will exit the
settings mode. If
is not pressed, the
remote controller will automatically exit
setup mode after 25 seconds with no
input. If the set button is not pressed, the
changes will not take effect.
6
If finishing sleep reservation setup,
air-conditioner product operates sleep
drive and stops after the time that is set.
Programming - ON Reservation
Automatically turned On at reserved time that you set.
Owner's Instructions
Press
button.
1
Ex) Setting ON Reservation
Time as 'AM 10:20'.
Press the
button until the
2
ON segment flashes.
(
segment flashing)
Press
button to adjust AM/ PM
3
setting.
4
Press
button to Hour setting
mode. When the Hour icon flashes, you
can set the time between 1-12.
Press
button to shift to Minute
5
setting mode. When the Minute icon
flashes, you can set the time between
00-59.
6
Press
button to finish setting.
Owner's & Installation Manual 55
Hide quick links:
Advertisement
Table of Contents
