Self-Diagnosis For Trouble Mode; Outage Compensation Function - LG PQRCVSL0 Owners & Installation Manual
New wide wired remote controller for air conditioner
Hide thumbs
Also See for PQRCVSL0:
- Owners & installation manual (34 pages) ,
- Installation manual (23 pages) ,
- Owner's manual (239 pages)
Table of Contents
Advertisement
Owner's Instructions
Self-diagnosis for Trouble Mode
It automatically runs a self-diagnosis when there is a trouble detected in the system.
It displays the troble mode number with maintenance CODE.
<Individual control>
<Group control>
C When detecting an error during group control, the system will display as
below.
<In case of CH05 ERROR, 4 letters C,H,0,5 will display one by one.>
In order to expedite a service, please remember the error number and provide it when consulting an
installer.
An emergency elevation grill can be operated even in the case of errors.
(Except the trouble mode number 03)
C If the centralized control lock or wired remote controller lock is programmed, this function will not work.
C Some product may not include this function.
Outage Compensation Function
If power supply fails due to outage or other reasons, the outage compensation function automatically
retrieves the operating conditions previously programmed before the power failure. Thus, you don't
need to press any buttons.
(Additional functions will not be retrieved automatically.)
72 New Wide Wired Remote Controller
Checkups before reporting breakdown
Please first check the items below for product's defects before consulting to the service center.
Symptoms
Check-up
• Is air-conditioner's power on?
• Are air-conditioner and remote
It has no power.
controller properly connected
with cable?
• Is cable connection correct?
It does not
• Did you correctly setup time?
operate
• Did you correctly make a
reservation drive.
reservation?
It does not
• Is desired temperature setup
release cool wind.
lower than current temperature?
• Is the reservation drive set up?
Air-conditioner
automatically runs
or stops.
• Does remote controller indication
Error is indicated
window indicate 'CH03'?
on remote
controller
indication window.
Management
• Please check circuit breaker.
• Please check wire remote controller's
setup condition.
• Please connect air-conditioner and remote
controller cable.
• Please check again referring to setup
method at the manual.
• Please set up current time correctly.
• Please set up again referring to the
manual.
• Please set up desired temperature lower
than current temperature.
• When reservation setting button and
set/cancel button are pressed
simultaneously for 3 seconds or longer, all
set reservations will be cancelled.
• Please check again wire remote
controller's setup condition.
• Please check again connection condition
of air-conditioner and remote controller
cable.
Owner's & Installation Manual 73
Hide quick links:
Advertisement
Table of Contents
