Sub Function - Humidifier; Sub Function - Electric Heater - LG PQRCVSL0 Owners & Installation Manual
New wide wired remote controller for air conditioner
Hide thumbs
Also See for PQRCVSL0:
- Owners & installation manual (34 pages) ,
- Installation manual (23 pages) ,
- Owner's manual (239 pages)
Table of Contents
Advertisement
Owner's Instructions
Sub function - Humidifier
Only products with humidifying function can use this.
•
Humidification function might not be available on all types of indoor unit.
38 New Wide Wired Remote Controller
1
Press the
button until the
icons flashes.
2
Turn on/off HUMIDIFIER by
pressing
button (The
icon
is displayed when set and
disappears when cancelled).
Pressing the
button will exit
3
the settings mode. If
is not
pressed, the remote controller will
automatically exit setup mode
after 25 seconds with no input. If
the set button is not pressed, the
changes will not take effect.
Sub function - Electric Heater
It is a function to strengthen the heating ability by turning on the electric heater during the heating
operation.
It can only be set during heating operation.
• Heater function is additional function and it only operates in selected models.
• The indoor unit product with Auxiliary Heater function set automatically displays (0) icon during
the AUXILIARY HEATING OPERATION.
When using non-heat recovery out door unit , emergency heater can be turned on for
simultaneous heating and cooling. Indoor units with the emergency heater must be turned OFF for
simultaneous cooling and heating.
※Heater function is additional function and it only operates in selected models.
Emergency heater can be turned on while in error code in case of emergency.
Electric heater icon is displayed on LCD display window with error code when emergency heater is
on while in error.
※Exception case: Error code 1,3,9,10
※If the previous mode of the Indoor unit is COOL, DRY, or FAN ONLY mode, heater must be
turned on manually.
Owner's Instructions
Press the
button until the
1
icons flashes.
Turn on/off ELECTRIC HEATER
2
by pressing
button (The
icon is displayed when set and
disappears when cancelled).
Pressing the
button will exit
3
the settings mode. If
is not
pressed, the remote controller
will automatically exit setup
mode after 25 seconds with no
input. If the set button is not
pressed, the changes will not
take effect.
Owner's & Installation Manual 39
Hide quick links:
Advertisement
Table of Contents
