Installer Setting - Celsius/Fahrenheit; Installer Setting - Option Function Setting - LG PQRCVSL0 Owners & Installation Manual
New wide wired remote controller
Hide thumbs
Also See for PQRCVSL0:
- Owners & installation manual (38 pages) ,
- Installation manual (23 pages) ,
- Owner's manual (239 pages)
Table of Contents
Advertisement
Installation instruction
Installer Setting-Celsius / Fahrenheit Switching
This function is used for switching the display between Celsius and Fahrenheit.
(Optimized only for U.S.A)
❈
Whenever press
button in Fahrenheit mode, the temperature will increase/drop 2
degrees.
22 New Wide Wired Remote Controller
1
If pressing
button long for 3
seconds, it enters into remote
controller setter setup mode.
- If pressing once shortly, it
enters into user setup mode.
Please press more than 3 seconds for
sure.
2
Repeat pressing
button to select
Function code 12.
Function Code
conversion mode value
Ex) Fahrengeit Setting
3
Select Temperature unit mode by
pressing
button.
(00: Celsius, 01: Fahrenheit)
4
Press
button to save or release.
5
Press
button to exit or
system will automatically exit
after 25 seconds without any
input.
Installer Setting - Option Function Setting
Setting feature for indoor unit when air cleaning / heater / humidifier / Up/down grill / Ventilation KIT is
newly installed, or installed unit is removed.
Installation instruction
1
If pressing
button long for 3
seconds, it enters into remote
controller setter setup mode.
- If pressing once shortly, it enters
into user setup mode. Please press
more than 3 seconds for sure.
2
If pressing
button repeatedly, it moves to
the selected option function code as picture
below.
Function
Plasma purification
Electric heater
Dehumidifier
Elevation grill
Ventilation kit
3
Select existing condition
of each mode by pressing
button.
(00: not installed,
01 : installed)
Function Code
Existing condition
4
Press
button to save.
5
Pressing
button will exit settings mode.
❈ After setup, it automatically gets out of
setup mode if there is no button input for
25 seconds.
❈ When exiting without pressing set button,
the manipulated value is not reflected.
Ownerʼs & Installation Manual 23
Code
20
21
22
23
24
- Quick Links:
- Standard Operation - Standard Cooling
Hide quick links:
Advertisement
Table of Contents
