Installer Setting-Remote Controller Master/Slave Setup; Installer Setting - Override Master/Slave Setting - LG PQRCVSL0 Owners & Installation Manual
New wide wired remote controller
Hide thumbs
Also See for PQRCVSL0:
- Owners & installation manual (38 pages) ,
- Installation manual (23 pages) ,
- Owner's manual (239 pages)
Table of Contents
Advertisement
Installation instruction
Installer Setting-Remote Controller Master/Slave Setup
It is a function for settings in group control, or 2-remote controller control.
Remote controller
Indoor unit operates based on master remote controller at group control.
Master
(Master is set when delivering from the warehouse.)
Setup all remote controllers except one master remote controller to slave at
Slave
group control
❈
Refer to the 'group control' part for details
•
When controlling in groups, basic operation settings, airflow strength weak/medium/strong,
lock setting of the remote controller, time settings, and other functions may be restricted.
18 New Wide Wired Remote Controller
1
If pressing
button long for 3
seconds, it enters into remote
controller setter setup mode.
- If pressing once shortly, it enters
into user setup mode. Please press
more than 3 seconds for sure.
2
If pressing
button repeatedly, it moves to
master/slave selection menu as picture
below.
3
Select Master/ Slave by pressing
button.
(00: Slave, 01: Master)
Function Code
Master/Slave value
4
Press
button to save.
5
Pressing
button will exit settings mode.
❈ After setup, it automatically gets out of
setup mode if there is no button input for
25 seconds.
❈ When exiting without pressing set button,
the manipulated value is not reflected.
Function
Installer Setting - Override Master/Slave Setting
Override master/slave selection function is, since Multi-V 7 series model, the function to prevent
product's different mode operation. If it setup as the slave, It blocks to change opposite run mode to
outdoor unit cycle (cooling/heating)
❈
Override master/slave selection function is possible to use only when it is connected to the
succeeding models of Multi-V 7 series.
Installation instruction
1
If pressing
button long for 3
seconds, it enters into remote
controller setter setup mode.
- If pressing once shortly, it enters
into user setup mode. Please press
more than 3 seconds for sure.
2
If pressing
button repeatedly, it moves to
override master/slave selection menu as
picture below.
3
Select Master/ Slave by pressing
button.
(00: Slave, 01 : Master)
Function Code
Master/Slave
4
Press
button to save.
5
Pressing
button will exit settings mode.
❈ After setup, it automatically gets out of
setup mode if there is no button input for
25 seconds.
❈ When exiting without pressing set button,
the manipulated value is not reflected.
Ownerʼs & Installation Manual 19
- Quick Links:
- Standard Operation - Standard Cooling
Hide quick links:
Advertisement
Table of Contents
