Installer Setting -E.s.p - LG PQRCVSL0 Owners & Installation Manual
New wide wired remote controller
Hide thumbs
Also See for PQRCVSL0:
- Owners & installation manual (38 pages) ,
- Installation manual (23 pages) ,
- Owner's manual (239 pages)
Table of Contents
Advertisement
Installation instruction
Installer Setting - Setting Address of Central
It's the function to use for connecting central control.
Please refer to central controller manual for the details
12 New Wide Wired Remote Controller
1
If pressing
button long for 3
seconds, it enters into remote
controller setter setup mode.
- If pressing once shortly, it enters
into user setup mode. Please press
more than 3 seconds for sure.
2
If entering into address setup mode by using
button, it indicates as picture below.
Indoor No.
Group No
Function Code
3
Set Group No. by pressing
button.(0~F)
4
Move to Indoor No. setting option
by pressing
button.
5
Set Indoor No. by pressing
button.
6
Press
button to save.
7
Pressing
button will exit settings mode.
❈ After setup, it automatically gets out of
setup mode if there is no button input for
25 seconds.
❈ When exiting without pressing set button,
the manipulated value is not reflected.
Installer Setting -E.S.P.
This is the function that decides the strength of the wind for each wind level and because this
function is to make the installation easier.
• If you set ESP incorrectly, the air conditioner may malfunction.
• This setting must be carried out by a certificated-technician.
Function code,
ESP code
ESP value
• When setting ESP value on the product without very weak wind or power wind function, it
may not work.
Installation instruction
1
If pressing
button long for 3
seconds, it enters into remote
controller setter setup mode.
- If pressing once shortly, it enters
into user setup mode. Please press
more than 3 seconds for sure.
2
If entering into ESP setup mode by using
button, it indicates as the picture
below.
ESP step
Function Code
ESP value
3
Select ESP fan step by pressing
button. (01: very low, 02: low, 03:
medium, 04: high, 05: power)
4
Move to ESP value setting by pressing
button.
(It is 000 when delivering
from the warehouse.)
5
Press
button to setup ESP value.
(It is possible to setup ESP
value from 1 to 255, and 1 is
the smallest and 255 is the
biggest.)
Ownerʼs & Installation Manual 13
- Quick Links:
- Standard Operation - Standard Cooling
Hide quick links:
Advertisement
Table of Contents
