Owner's instruction
Sub function - Electric Heater
It is a function to strengthen the heating ability by turning on the electric heater during the heating
operation.
It can only be set during heating operation.
•
Heater function is additional function and it might not be operated at the partial product.
34 New Wide Wired Remote Controller
1
Repeatedly pressing
button
until
icon flash.
2
Turn on/off ELECTRIC HEATER
by pressing
button (the
icon will be displayed in case of
SETTING option and disappear
in reverse case .)
3
Press
button to exit.
❈ After setup, it automatically
gets out of setup mode if there
is no button input for 25
seconds.
❈ When exiting without pressing
set button, the manipulated
value is not reflected.
Sub function - Energy-Saving Cooling Operation
Power saving air-cooling function is the function to improve use's comfortableness and power saving
capacity by adjusting desired temperature while running air-cooling
• Power saving function is possible to setup only when running air-cooling.
• Power saving function might not be operated at the partial product.
Owner's instruction
1
Repeatedly pressing
button
until
icon flash.
2
Operate or cancel Energy-Saving
function by pressing
button.
(To cancel power saving function,
you move to power saving menu by
pressing
button, and then if pressing
button, power saving icon disappears
and the function is cancelled. )
3
Press
button to exit.
❈ After setup, it automatically
gets out of setup mode if there
is no button input for 25
seconds.
❈ When exiting without pressing set
button, the manipulated value is not
reflected.
Ownerʼs & Installation Manual 35