Function Setting - Elevation Grill; Function Setting - Vane Angle Control - LG PQRCVSL0 Owners & Installation Manual
New wide wired remote controller
Hide thumbs
Also See for PQRCVSL0:
- Owners & installation manual (38 pages) ,
- Installation manual (23 pages) ,
- Owner's manual (239 pages)
Table of Contents
Advertisement
Owner's instruction
Function setting - Elevation Grill
This function is to move the indoor filter up/down for cleaning filter.
•
Elevation grill function only operates in the indoor unit with the elevation grill.
40 New Wide Wired Remote Controller
1
Press
button
Repeat pressing
button until
icon flash.
2
Move to descent using
button
and press
button will display
descent icon and the up/down grill will
descent.
3
When up/down grill descents to the
desired position, move to stop icon
suing
button and press
button
to stop up/down grill.
4
When filter cleaning is finished, fix the
filter to the up/down grill, move to ascent
icon using
button, and press
button to ascent up/down grill.
5
Press
button to exit.
❈ After setup, it automatically
gets out of setup mode if there
is no button input for 60
seconds.
❈ When exiting without pressing set
button, the manipulated value is not
reflected.
Function setting - Vane Angle Control
This function is to adjust angle at which airflow is blow out.
Owner's instruction
1
Repeat pressing
button until
icon flash.
2
Press
button to select active vane :
1 / 2 / 3 / 4 / All / Standard
Select Vane number using
buttons.
❈ Vane number : No. 1, 2., 3, 4, all, or
standard
- Selected vane is in operation.
- Please verify the operating vane.
- To set the angle of all the vanes,
select 'all'.
- To set as the factory default settings,
select 'standard'.
3
Select wind angle using
button,
and press
button.
- The boundary of wind angle settings
can be changed to 5 levels or 6 levels
according to the product.
- When selecting 'standard' for Vane
number, the wind angle does not move.
4
Set the wind angles for the remaining
vanes as the same as above.
❈ There are products with vanes with
no. 1 and no. 2 only according to the
product types.
Press
button to exit.
5
❈ After setup, it automatically
gets out of setup mode if there
is no button input for 60 seconds.
❈ When exiting without pressing set
button, the manipulated value is not
reflected.
6
Press
button to complete and
active the setting process.
(Airflow direction function will be
released whenever setting vane angle)
7
Press
button to exit or
system will automatically release
without any input after 25
seconds.
Ownerʼs & Installation Manual 41
- Quick Links:
- Standard Operation - Standard Cooling
Hide quick links:
Advertisement
Table of Contents
