Programming - Simple Reservation; Programming - Sleep Reservation - LG PQRCVSL0 Owners & Installation Manual
New wide wired remote controller
Hide thumbs
Also See for PQRCVSL0:
- Owners & installation manual (38 pages) ,
- Installation manual (23 pages) ,
- Owner's manual (239 pages)
Table of Contents
Advertisement
Owner's instruction
Programming - Simple Reservation
You can set the reservation conveniently in the units of 1 hour from 1 hour to 7 hours.
❈
When simple reservation setup, product automatically runs or stops after the time that is set.
46 New Wide Wired Remote Controller
1
Press
button to enter the
Programming mode.
(the
segment flashing)
Ex) Setting Simple Reservation
time as '3'.
2
Press
button to adjust reservation
time.
3
Press
button to finish setting.
4
Press
button to exit.
❈ After setup, it automatically gets out of
setup mode if there is no button input
for 25 seconds.
❈ When exiting without pressing set
button, the manipulated value is not
reflected.
Programming - Sleep Reservation
Sleep reservation is the function of air-conditioner to run and stop after certain period of time at sleep
mode before sleep. When connected to a ventilation product and set the sleep reservation, when it
goes to the sleep mode, after the set time has elapsed.
CAUTION
Please reserve proper time at sleeping. (Too much air-cooling is not good for your health.)
• Because it automatically adjusts desired temperature for comfortable air-cooling at sleep drive,
there could be difference between remote controller's desired temperature and air-conditioner
body's desired temperature.
• Sleep reservation operates as off reservation for the product whose temperature adjustment isn't
controlled by unit of 0.5°C.
Owner's instruction
1
Press
button to enter the
Programming mode.
Ex) Setting Sleep Reservation
time as '3'.
2
Repeat pressing
button to enter the
SLEEP reservation setting mode.
(
segment flashing)
3
Press
button to adjust reservation
time.
The SLEEP reservation time is from 1 to
7 hours.
4
Press
button to finish setting.
Whenever reservation is done.
5
Press
button to exit.
❈ After setup, it automatically gets out of
setup mode if there is no button input
for 60 seconds.
❈ When exiting without pressing set
button, the manipulated value is not
reflected.
- If reservation is setup, 'sleep'
indication shows up at the lower part
of LCD screen.
6
If finishing sleep reservation setup, air-
conditioner product operates sleep drive
and stops after the time that is set.
Ownerʼs & Installation Manual 47
- Quick Links:
- Standard Operation - Standard Cooling
Hide quick links:
Advertisement
Table of Contents
