Table of Contents
Advertisement
Controlling the LCD monitor via RS-232C Remote Control
This monitor can be controlled by connecting a personal computer with an RS-232C (reverse type) terminal.
For example, some of the functions that can be controlled by a personal computer are:
•
Power ON or standby.
•
Switching between input signals.
•
Sound Mute ON or OFF.
Connection
Monitor + computer.
•
Please turn off the monitor's main power before connecting a computer to the monitor.
•
Please turn on the connected computer first then turn on the monitor's main power.
If you turn on the computer and monitor in reverse order, the com port may not work.
•
When controlling the monitor connected with an RS-232C cable, please refer to the Control command (See
the "External_Control.pdf" file on the CD-ROM supplied with the monitor.
Computer
OIUEN:
If your computer is equipped only with a 25-pin serial port connector, a 25-pin serial port adapter is required. Contact
your supplier for details.
For the pin assignment, please see "2) RS-232C input/output" on
To control the monitor, please use the control command. Instructions for the control command can be found on the CD-ROM
supplied with the monitor. The file is called "External_control.pdf".
RS-232C Cable
page
English-49
RS-232C
50.
page
57) or see
Advertisement
Table of Contents
