Table of Contents
Advertisement
OEUWIRK & IUHER SEUUIOGS
The settings below are the options for the Network settings and Shared Folder settings for the Media Player.
To configure the settings, press the remote control SET/POINT ZOOM button on the NETWORK & OTHER SETTINGS.
NETWORK SETTINGS for MEDIA PLAYER
Menu
Function
IP SETTING
Set these settings.
IP ADDRESS
SUBNET MASK
DEFAULT GATEWAY
DNS
DNS PRIMARY
DNS SECONDARY
NETWORK INFORMATION for the Media Player displays what you set in the NETWORK SETTINGS for the Media Player.
SHARED FOLDER
There are two settings for configuring the SHARED FOLDER.
Press the remote control SET/ZOOM button to open the shared settings options.
•
SHARED SD CARD SETTINGS
Folders saved in a computer on the network can be copied to the connected microSD memory card using a web browser on
the connected computer.
Menu
Function
ENABLE
Check the checkbox to enable SHARED SD CARD SETTINGS.
USER NAME
USER NAME is displayed. It is the same name as the monitor name and it is not changeable.
PASSWORD
Set password.
Please press OK to activate settings in the SHARED SD CARD SETTINGS.
If OK is not pressed, settings that you set are not activated.
•
SHARED FOLDER SETTINGS.
Folders saved in a computer on the network can be copied to the connected microSD memory card by controlling the
monitor.
Menu
Function
ENABLE
Check the checkbox to enable SHARED FOLDER SETTINGS.
SHARED FOLDER
Set the IP address of the network shared folder location that contains the files for copying to the microSD card.
USER NAME
Set USER NAME which is used when connecting the monitor to the shared folder.
PASSWORD
Set password.
Please press OK to activate settings in the SHARED FOLDER SETTINGS.
If OK is not pressed, settings that you set are not activated.
1 to 4 shared folders can be set.
When the connection to the shared folder fails, an error message is displayed and an "x" is displayed in the folder icon.
Carry out the following checks in this case.
- Is the name of the destination folder correct?
- Is the destination folder set for sharing?
- Have access rights been set in the destination folder?
- Are there any displayable files saved in the destination folder?
SHIFT NO SIGNAL
This setting is for a situation when the monitor detects no signal input. If ENEBLE is ticked, the monitor goes to no signal status.
The monitor detects no signal when the monitor is in the following conditions:
- After contents or images are played.
- While the monitor is displaying USB
Menu
Function
ENABLE
Check the checkbox to enable SHIFT NO SIGNAL.
INTERVAL
Set the time when the monitor goes into no signal after displayed detected items.
Please press OK to activate settings in the SHIFT NO SIGNAL.
If OK is not pressed, settings that you set are not activated.
window or SD CARD
window.
English-26
Advertisement
Table of Contents
