Table of Contents
Advertisement
Safety Precautions, Maintenance & Recommended Use
Safety Precautions and Maintenance
FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE
FOLLOWING WHEN SETTING UP AND USING
THE MULTI-FUNCTION MONITOR:
DI OIU IPEO UHE MIOIUIR. There are no user
•
serviceable parts inside and opening or removing covers
may expose you to dangerous shock hazards or other
risks. Refer all servicing to qualified service personnel.
•
Do not bend, crimp or otherwise damage the power cord.
•
Do not place any heavy objects on the power cord.
Damage to the cord may cause shock or fire.
•
The power supply cord you use must have been
approved by and comply with the safety standards of your
country. (e.g. Type H05VV-F 3G 0.75 mm
in Europe).
•
In the UK use a BS-approved power cord with a molded
plug having a black (5 A) fuse installed for use with this
monitor.
•
The power cable connector is the primary means of
detaching the system from the power supply. The monitor
should be installed close to a power outlet that is easily
accessible.
•
Do not spill any liquids into the cabinet or use your
monitor near water.
•
Do not insert objects of any kind into the cabinet slots,
as they may touch dangerous voltage points, which can
be harmful or fatal, or may cause electric shock, fire or
equipment failure.
•
Do not place this product on a sloping or unstable cart,
stand or table, as the monitor may fall, causing serious
damage to the monitor.
•
Do not mount this product upside down for an extended
period of time as it may cause permanent damage to the
screen.
•
Do not use the monitor outdoors.
•
If glass is broken, handle with care.
•
This monitor is equipped with temperature control fans.
For reliable performance and long life use of this product,
it is required that the vents on the monitor are not
covered.
•
If the monitor or glass is broken, do not come in contact
with the liquid crystal and handle with care.
•
Allow adequate ventilation around the monitor, so that
heat can properly dissipate.
•
Do not block ventilated openings or place the monitor
near a radiator or other heat sources.
•
Do not put anything on top of the monitor.
•
Handle with care when transporting. Save packaging for
transporting.
•
When running the cooling fan continuously, we
recommend wiping clean the ventilation holes a minimum
of once a month.
•
To ensure the monitor's reliability, please clean the
ventilation holes at the rear side of the cabinet at least
once a year to remove dirt and dust.
•
When using a LAN cable, do not connect to a peripheral
device with wiring that might have excessive voltage.
•
Do not use the monitor in high temperature, humid, dusty,
or oily areas.
•
Do not use the monitor under rapid changes in
temperature and humidity, and avoid cold air directly
from an air-conditioning vent. These conditions may
shorten the life of the monitor or cause condensation.
If water condensation has occurred, unplug the monitor
and do not use the monitor until the condensation has
evaporated.
Connecting to a TV*
•
Cable distribution system should be grounded (earthed)
in accordance with ANSI/NFPA 70, the National Electrical
Code (NEC), in particular Section 820.93, Grounding of
Outer Conductive Shield of a Coaxial Cable.
2
should be used
•
The screen of the coaxial cable is intended to be
connected to earth in the building installation.
Under the following conditions immediately disconnect your
monitor from the wall outlet and refer servicing to qualified
service personnel:
•
If the power supply cord or plug is damaged.
•
If liquid has spilled, or objects have fallen into the monitor.
•
If the monitor has been exposed to rain or water.
•
If the monitor has been dropped or the cabinet has been
damaged.
•
If you notice any structural damage such as cracks or
unnatural wobbling.
•
If the monitor does not operate normally by following
operating instructions.
Recommended Use
Ergonomics
To realize the maximum ergonomic benefits, we recommend
the following:
•
For the monitor's optimum performance, allow 20 minutes
for warming up. Avoid reproduction of still patterns on
the monitor for long periods of time to avoid image
persistence (after image effects).
•
Rest your eyes periodically by focusing on an object at
least 5 feet away. Blink often.
•
Position the monitor at a 90° angle to windows and other
light sources to minimize glare and reflections.
•
Adjust the monitor's brightness, contrast and sharpness
controls to enhance readability.
•
Get regular eye checkups.
•
Use the preset Size and Position controls with standard
input signals.
•
Use the preset color settings.
•
Use non-interlaced signals.
•
Do not view the primary color blue on a dark background.
It is difficult to see and may cause eye fatigue due to
insufficient contrast.
•
Suitable for entertainment purposes at controlled
luminous environments, to avoid disturbing reflections
from the screen.
* The product you purchased may not have this feature.
English-3
Advertisement
Table of Contents
