Table of Contents
Advertisement
Connecting a USB device
USB1:
USB downstream port (Type-A).
Connect a USB compatible flash memory or keyboard to Down Stream Port.
USB2:
USB upstream port (Type-B).
Connect to a USB compatible computer with a USB cable.
A USB compatible computer connected to USB2 can control the devices connected to USB1.
USB CM1 (2A): Power supply port.
Please refer to the specifications page for power supply information (see
USB CM2:
Service port.
Please do not connect devices.
USB MP:
USB downstream port (Type-A).
To use the Media Player function, please use this port.
•
Please make sure the connector shape and orientation is correctly aligned when connecting the USB device or cable.
•
Depending on the use of computer BIOS, OS or device, the USB function may not be working. In this case, please check
user's manual of your computer or device, or contact your supplier for detailed information.
•
Before turning off the main power switch of the monitor or shutting down Windows
remove the USB cable from the monitor. You may lose data when the computer crashes.
•
It may take a few seconds until the monitor recognizes the USB input. Do not disconnect the USB cable or disconnect and
reconnect the USB cable before the monitor recognizes the input.
•
You can set power supply for USB CM1 (2A) at USB POWER in the OSD menu (see
•
When you use the USB CM1 (2A) port for power supply, please use a USB cable that supports 2A.
•
Please refer to the USB in the OSD menu (See
OIUEN:
USB CM1 (2A) and USB CM2 are not corresponding port.
Please refer to the connection (See
CCUUIION: Do not bind the USB cable. It may trap heat and start a fire.
page
44) for the USB setting.
page
17) to connect USB devices to the monitor.
English-19
page
72,
page
73,
page 74
, please turn off the USB function and
®
page
44).
and
page
75).
Advertisement
Table of Contents
