Table of Contents
Advertisement
Installer setting
• You can set the product user functions.
• Some functions may not be displayed/operated in some product types.
Test
3 Minutes Delay
Select Temperature Sensor
Dry Contact Mode setting
Central Control address
Pump Test run
Air cooling set temp. setting
Water cooling set temp. setting
Air heating set temp. setting
Water heating set temp. setting
DHW Set Temp.setting
Screed drying setting
Heater on temperature
Water supply off temp. during
cooling setting
Tank disinfection setting 1
Tank disinfection setting 2
Tank setting 1
Tank setting 2
Heater priority
DHW time setting
Use Heating Tank Heater
TH on/off Variable, heating air
setting
TH on/off Variable, heating Water
setting
Factory use only
Selection for setting temperature as air temperature or leaving water
temperature or air+leaving water temperature
Dry contact function is the function that can be used only when the dry contact
devices is separately purchased and installed.
When connecting the central control, set the central control address of the unit.
Water pump test run
Adjusting range of 'Setting Air Temperature' in cooling mode
Adjusting range of 'Setting Leaving Water Temperature' in cooling mode
Adjusting range of 'Setting Air Temperature' in heating mode
Adjusting range of 'Setting Heating Flow Temperature' in heating mode
Setting DHW set temperature
Setting for using Step 1 or 2 capacity of electric
Setting outdoor air temperature where half capacity of electric heater starts
operation.
Determine leaving water temperature when the unit is turned off. This funtion is
used for preventing condensation on the floor in cooling mode
Setting start/maintain time for pasteurisation
Setting pasteurisation temperature
Setting start temperature for operation
Setting maintain temperature for operation
Determine electric heater and water heater on and off
Determine follow time duration : operation time of domestic hot water tank
heating, stop time of domestic hot water tank heating, and delay time of DHW
tank heater operating
Change setting value for hot water tank heater operation such as hot water
tank heater use / unused and heater delay time
Heating air temperature TH On / Off Type setting
Heating Water Outlet Temperature TH On / Off Type
- 44 -
Description
Copyright © 2018 LG Electronics Inc. All rights reserved.
Only training and service purposes.
- Quick Links:
- Model Information
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
