LG AMNH076LQL0 Service Manual page 49
Multi type
Hide thumbs
Also See for AMNH076LQL0:
- Service manual (249 pages) ,
- Manuals (254 pages) ,
- Product data (78 pages)
Table of Contents
Advertisement
5. CVT Type Indoor Unit
- VB chassis
Before Installing, prepare Installation Plates
• 'Installation Plates' are attached at the bottom of
indoor unit.
Detach them by removing each 3 screws at both
sides.
• Detach 'Side Plate (R,L)' by removing each 2 screws
on both sides.
• Pull the upper right and left side of 'Inlet Grille' to the
front, and it will stop at slightly tilted position.
• Unhook the 'Inlet hanger' from the 'Hanger screw' on
the both left and right side.
• Detach the 'Inlet Grille' from the Indoor Unit.
1) Installation on the ceiling
• Measure and mark the position for the
Suspension bolts and the piping hole.
• Drill the hole for anchor nut on the ceiling.
Before secure the Installation Plates, select the bent
direction of the Installion Plate to the inside or the
outside according to the installation circumstances.
• Drill the piping hole on the wall slightly tilted to the
outdoor side using a ø70 hole-core drill.
Install Plate
Inlet Grille
1076
1)
Suspension
2)
1236
Indoor
Installation
Side Plate
Inlet hanger
Hanger
screw
265
bolt
Center-line for the
piping hole
265
WALL
Outdoor
5~7mm
Service Manual 49
- Quick Links:
- Outdoor Units
- Outdoor Unit
- Product Specifications
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
