NEC MultiSync UN552 User Manual page 64
Large format display
Hide thumbs
Also See for MultiSync UN552:
- User manual (129 pages) ,
- Firmware update procedure (13 pages) ,
- Installation manual (5 pages)
Table of Contents
Advertisement
Locking the IR Remote Buttons
The [IR LOCK SETTINGS] prevent the monitor from being controlled using the remote control. Enabling the [IR LOCK
SETTINGS] does not lock the buttons the monitor control panel.
MULTI-INPUT
CONTROL:
NETWORK INFORMATION
LAN
CHANGE PASSWORD
SECURITY
IR LOCK SETTINGS
KEY LOCK SETTINGS
DDC/CI
PING
IP ADDRESS RESET
AUTO DIMMING
POWER INDICATOR
NETWORK FUNCTIONS
USB
CEC
RESET
1. Using the remote control navigate to [CONTROL] then to [IR LOCK SETTINGS].
2. Under [MODE SELECT] choose the lock mode you want to enable.
•
[LOCK ALL] – all buttons are locked.
•
[CUSTOM LOCK] – all remote buttons are locked except for the following buttons that can be individually set as locked
or unlocked.
•
[POWER] – select [UNLOCK] to be able to use the
button.
•
[VOLUME] – select [UNLOCK] to be able to control the volume with the VOL+, VOL- buttons when the IR Remote is
locked. Select LOCK to prevent volume adjustment.
When activating the volume lock, the display volume will immediately change to the MIN VOL value.
•
[MIN VOL] and [MAX VOL] – the volume buttons are unlocked, and the volume level can only be adjusted within
the [MIN] and [MAX] range set.
The [VOLUME] must be set to [UNLOCK] for this setting to operate.
•
[INPUT] – select [UNLOCK] and then select up to 3 input buttons to remain unlocked. Select [LOCK] to lock all input
buttons.
•
[CHANNEL] – select [UNLOCK] to be able to change channels with the CH/ZOOM+, CH/ZOOM- buttons when the IR
remote is locked. Select [LOCK] to lock these buttons.
An optional tuner card must be installed for the channel buttons to function.
3. Select [ACTIVATE] to activate all settings.
Unlocking the IR Remote Controls
•
IR Remote Control – to return to normal operation press-and-hold the DISPLAY button for at least 6 seconds.
OPTION
C MODULE
MODE SELECT
CUSTOM LOCK
POWER
UNLOCK
/
LOCK
VOLUME
UNLOCK
/
LOCK
MIN VOL
+ 10
MAX VOL
+ 80
INPUT
UNLOCK
/
LOCK
UNLOCK SELECT
DVI
DisplayPort
HDMI1
CHANNEL
UNLOCK
/
LOCK
ACTIVATE
/
DEACTIVATE
button when the IR Remote is locked. Select [LOCK] to lock the
English−60
Advertisement
Table of Contents
