System - NEC MultiSync V984Q User Manual
Large format display
Hide thumbs
Also See for MultiSync V984Q:
- Installation manual (13 pages) ,
- Setup manual (71 pages) ,
- User manual (80 pages)
Table of Contents
Advertisement
SLOT2 CH SETTING
Selects signal type according to the slot 2 type option specifications.
AUTO
Sets the signal type automatically.
1CH
Fills the screen entirely with the signal which is selected in SLOT2 CH SELECT.
2CH
The DisplayPort signal is displayed on the left half of the screen, the TMDS signal is displayed on the right
half. If the internal PC does not support either one of the signal types, the existing signal will automatically be
displayed on the full screen.
SLOT2 CH SELECT
This function is available only when SLOT2 CH SETTING is 1CH.
DisplayPort
Shows the DisplayPort signal from a slot 2 type PC option on the full screen.
TMDS
Shows the TMDS signal from a slot 2 type PC option on the full screen.
RESET
Resets the AUDIO setting back to the factory setting within the OPTION menu.
SYSTEM
MONITOR INFORMATION Shows the model name, serial number and firmware version of your monitor.
CARBON SAVINGS: Display the estimated carbon saving information in kg-CO2. The carbon footprint factor in
the carbon saving calculation is based on the OECD (2008 Edition).
CARBON USAGE: Display the estimated carbon usage information in kg-CO2. This is the arithmetic estimation,
not actual measurement value. This estimation is based without any options.
FIRMWARE
Displays firmware version that is installed to the monitor.
MAC ADDRESS
Displays the MAC ADDRESS.
FACTORY RESET
All items are returned to factory shipment state.
NOTE: You can reset all items in all daisy chained monitors. Please be careful to avoid resetting all items
inadvertently.
Default values can be provided on request.
English-45
Advertisement
Table of Contents
