Schedule - NEC MultiSync V984Q User Manual
Large format display
Hide thumbs
Also See for MultiSync V984Q:
- Installation manual (13 pages) ,
- Setup manual (71 pages) ,
- User manual (80 pages)
Table of Contents
Advertisement
SCHEDULE
SCHEDULE SETTINGS
Creates a working schedule for the monitor.
Press the
or Input change buttons on the monitor to select settings.
NOTE: Please set DAY & TIME before configuring the SCHEDULE SETTINGS.
When the SCHEDULE SETTINGS window is closed, any schedules that you set are saved.
If schedules are set for the same time, higher SETTINGS numbers are given the priority.
If OFF TIMER is ON, SCHEDULE SETTINGS is not available.
When you select an invalid input signal or picture mode, it will display in red. While the SCHEDULE SETTINGS
window is open, schedules are not operated. Also, see
SETTINGS
Set ON to activate the schedule. Maximum 30 schedules are set.
POWER
Setting for the monitor power. Please set ON or OFF for each schedule.
TIME
Set the schedule operation time. If there is no specific time for the schedule set [--].
INPUT
Set the input signal for the schedule. To keep the input signal that is active when the schedule starts set [--].
When you set INPUT, please select ON at POWER.
PIC. MODE
Set the picture mode for the schedule. To keep the picture mode that is active when the schedule starts set [--].
When you set PIC. MODE, please select ON at POWER.
Select one item from below (only one item is available).
DATE
Select this setting if the schedule is for one day schedule or irregular schedules.
EVERY DAY
Select this setting if the schedule is repeating every day.
EVERY WEEK
Select this setting if the schedule is repeating every week.
WEEKDAY
Select this setting if the schedule is on a weekday.
This item is set by the WEEKEND and the HOLIDAY settings. A day, which is not selected at WEEKEND and
HOLIDAY settings is set as a weekday.
WEEKEND
Select this setting if the schedule is on a weekend.
Schedule operates on the date that is set at WEEKEND SETTINGS.
HOLIDAY
Schedule operates on the date that is set at HOLIDAY SETTINGS.
SCHEDULE LIST
List of working schedules. Displays up to 30 schedules.
HOLIDAY SETTINGS
No.
Creates holiday schedule for the monitor.
YEAR
Set YEAR and MONTH.
MONTH
Select DAY or WEEK.
DAY
DAY: Set a day.
WEEK
WEEK: Set a week and the day of the week.
If you set [--] at MONTH or YEAR, every month or year of the day you select is set as a holiday.
END DAY
Set the end of holiday date. If you schedule beyond a year, please separate the schedule per year.
NOTE: If DAY is not set, END DAY is not available. If your holiday setting includes [--] for year or month, END
DAY is not available.
SET/DELETE
Sets or deletes a schedule.
WEEKEND SETTING
WEEKEND
Set the day of the week.
DATE & TIME
Sets the date, time, and daylight savings region. Date & time must be set in order for the "SCHEDULE" function
to operate.
NOTE: If the monitor's main power has been turned off for two weeks, the DATE & TIME setting goes back to the
default setting and the clock function stops working.
YEAR
Sets the year for the real-time clock.
MONTH
Sets the month for the real-time clock.
DAY
Sets the day for the real-time clock.
TIME
Sets the time for the real-time clock.
CURRENT DATE TIME
Shows the current date and time.
, +, - buttons to navigate and change the schedule settings. Press the SET/ZOOM on the remote
English-36
page
46.
Advertisement
Table of Contents
