Connecting A Personal Computer; Connecting A Player Or Computer With Hdmi; Connecting A Computer With Displayport - NEC MultiSync V984Q User Manual
Large format display
Hide thumbs
Also See for MultiSync V984Q:
- Installation manual (13 pages) ,
- Setup manual (71 pages) ,
- User manual (80 pages)
Table of Contents
Advertisement
Connecting a Personal Computer
Connecting your computer to your LCD monitor will enable you to reproduce your computer's video signal output.
Some display cards may not be able to support the required resolution for proper image reproduction.
Your LCD monitor shows proper image by adjusting the factory preset timing signal automatically.
<Typical factory preset signal timing>
Scanning frequency
Resolution
Horizontal
640 x 480
31.5 kHz
800 x 600
37.9 kHz
1024 x 768
48.4 kHz
1280 x 720
45.0 kHz
1280 x 768
47.8 kHz
1280 x 800
49.7 kHz
1280 x 1024
64 kHz
1360 x 768
47.7 kHz
1366 x 768
47.7 kHz
1400 x 1050
65.3 kHz
1440 x 900
55.9 kHz
1600 x 1200
75.0 kHz
1680 x 1050
65.3 kHz
1920 x 1080
67.5 kHz
1920 x 1200
74.6 kHz
1920 x 2160
133.3 kHz
3840 x 2160
65.7 kHz
3840 x 2160
67.5 kHz
3840 x 2160
133.3 kHz
3840 x 2160
135.0 kHz
3
4096 x 2160*
54.0 kHz
4096 x 2160*
3
135.0 kHz
*1: Recommended resolution.
*2: Only HBR2 is set.
*3: Compressed image.
Connecting a Player or Computer with HDMI
•
Please use an HDMI cable with the HDMI logo.
•
It may take a moment for the signal to appear.
•
Some display cards or drivers may not display an image correctly.
•
When you use a computer with HDMI, please set OVER SCAN to "AUTO" or "OFF" (see
•
Please check display card when image is compressed with 3840 x 2160.
•
To output HDMI audio, set [HDMI1], [HDMI2] or [HDMI3] at AUDIO INPUT in the OSD or choose [HDMI1], [HDMI2] or
[HDMI3] by the remote control AUDIO INPUT button.
•
If the input resolution is 3840 x 2160 (60 Hz) and 4096 x 2160 (60 Hz), please set MODE2 at HDMI in TERMINAL
SETTINGS (See
page
38).
•
If the monitor's main power is turned on after a connected computer is turned on, sometimes images are not displayed.
In this case, please turn off the computer then turn it on again.
Connecting a Computer with DisplayPort
•
Please use a DisplayPort cable with the DisplayPort compliance logo.
•
To use the DisplayPort out connector, please refer to Video out (See
•
It may take a moment for the signal to appear.
•
When connecting a DisplayPort cable to a component with a signal conversion adapter, an image may not appear.
•
Select DisplayPort cables feature a locking function. When removing this cable, hold down the top button to release the lock.
•
To output DisplayPort audio, set [DisplayPort1] or [DisplayPort2] at AUDIO INPUT in the OSD or choose [DisplayPort1] or
[DisplayPort2] by the remote control AUDIO INPUT button.
•
To display individual images at each connected monitors with the DisplayPort out connector, please set DisplayPort1.2 and
MST at DisplayPort in the TERMINAL SETTINGS (See
•
If the monitor's main power is turned on after a connected computer to the monitor is turned on, sometimes images are not
displayed. In this case, please turn off the computer then turn it on again.
HDMI
Vertical
MODE1
MODE2
60 Hz
Yes
Yes
60 Hz
Yes
Yes
60 Hz
Yes
Yes
60 Hz
Yes
Yes
60 Hz
No
No
60 Hz
Yes
Yes
60 Hz
Yes
Yes
60 Hz
No
No
60 Hz
No
No
60 Hz
Yes
Yes
60 Hz
Yes
Yes
60 Hz
Yes
Yes
60 Hz
Yes
Yes
60 Hz
Yes
Yes
60 Hz
Yes
Yes
60 Hz
Yes
Yes
30 Hz
No
No
30 Hz
Yes*
1
Yes
60 Hz
No
Yes
1
60 Hz
No
Yes*
24 Hz
Yes
Yes
60 Hz
No
Yes
English-18
DisplayPort
1.1a
1.2
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
1
Yes*
Yes
No
No
No
Yes*
1,
*
2
2
No
Yes*
No
No
No
No
page
68).
page
38).
page
34).
Advertisement
Table of Contents
