Parts Name And Functions; Control Panel - NEC MultiSync V984Q User Manual
Large format display
Hide thumbs
Also See for MultiSync V984Q:
- Installation manual (13 pages) ,
- Setup manual (71 pages) ,
- User manual (80 pages)
Table of Contents
Advertisement
Parts Name and Functions
Control Panel
A
Power Button (
)
Switches the power on/standby. See also
B
Mute Button (MUTE)
Switches the audio mute on/off.
C
Input/Set Button (INPUT/SET)
INPUT: Toggle switches between below inputs.
[DisplayPort1], [DisplayPort2], [HDMI1], [HDMI2], [HDMI3],
[MP], [OPTION*]. These are available inputs only, shown as
their factory preset name.
SET: When OSD (On Screen Display) is shown, this button
acts as a "set button" when you make a selection.
*: This function depends on which option board you are using.
D
Plus Button (+)
Increases the audio output level when the OSD menu is
turned off.
Acts as (+) button to increase the adjustment within the
OSD menu.
E
Minus Button (-)
Decreases the audio output level when the OSD menu is
turned off.
Acts as (-) button to decrease the adjustment within the
OSD menu.
F
Up Button ( )
Activates the OSD menu when the OSD menu is turned off.
Acts as
button to move the highlighted area up to select
adjustment items within the OSD menu.
G
Down Button ( )
Activates the OSD menu when the OSD menu is turned off.
Acts as
button to move the highlighted area down to select
adjustment items within the OSD menu.
H
page
20.
Activates the OSD menu when the OSD menu is turned off.
Acts as a back button within the OSD to move to the previous
OSD menu.
Acts as an EXIT button to close the OSD when on the main
menu.
I
Receives the signal from the remote control (when using the
wireless remote control). See also
Glows blue when the LCD monitor is in active mode*.
Green and Amber blink alternately when the "SCHEDULE
SETTINGS" function is enabled*
When a component failure is detected within the monitor, the
indicator will blink red or blink a combination of red and blue.
* If "OFF" is selected in the "POWER INDICATOR"
(see
active mode.
1
*
(see
NOTE: Please refer to the POWER INDICATOR (see
J
Detects the level of ambient light, allowing the monitor
to make automatic adjustments to the backlight setting,
resulting in a more comfortable viewing experience. Do not
cover this sensor. See
English-10
Menu/Exit Button (MENU/EXIT)
Remote Control Sensor and Power Indicator
page
43), the LED will not glow when the LCD monitor is in
If "OFF" is selected in the "SCHEDULE INDICATOR"
page
43), the LED will not blink.
Room Light Sensing Sensor
page
43.
page
14.
1
.
page
43).
Advertisement
Table of Contents
