Table of Contents
Advertisement
Product doesn't operate with the remote controller.
Trouble 2
While the compressor has been stopped, the compressor does not operate
At this point the wind speed is not controlled by the remote controller.
(When operated in the Sleeping Mode, the wind speed is set to the low speed as force).)
Caused by the remote controller.
When the mark (
screen, replace battery.
Copyright ©2009 LG Electronics. Inc. All right reserved.
Only for training and service purposes
Turn on main power.
owing to the delaying function for 2 minutes after stopped.
When the compressor stopped Indoor Fan is driven by a low speed.
) is displayed in LCD
Caused by other parts except
the remote controller
Check the contact of CN-DISP 1, 2 connector
Check DISP P.C.B Ass'y
-Voltage between CN-DISP1
Check point
• Check the connecting circuit between
MICOM PIN
• Check receiver ass'y
- 69 -
Troubleshooting Guide
-
: DC +5V
and CN-DISP1 PIN
LGE Internal Use Only
- Quick Links:
- Self-Diagnosis Function
- Outdoor Unit
Hide quick links:
Advertisement
Table of Contents
