Table of Contents
Advertisement
• Dehumidification, Fan Mode: There is no
temperature control.
NOTE
• Each press increases or decreases the
temperature by 1
\
Notes for Each Operation Mode
Cooling Mode
• The cooling mode doesn't work if desired
temperature is higher than room temperature.
- If so, please lower the desired temperature.
- 5
\
is proper for the difference between
room and outside temperature.
- When setting the desired temperature higher
than room temperature, only ventilation wind
is blow out instead of cooling wind.
Dehumidification Mode
• In rainy season or high humidity climate, it is
possible to operate simultaneously dehumidifier
and cooling mode to remove humidity
effectively.
Auto Mode
• You can use the FAN SPEED button during the
auto mode.
• You can change other operation mode manually
during the auto mode.
• The meanings of each code are like below.
Code
2
1
0
Maintain Room Temperature
or 1 ℉.
Description
Cold
A Little Cold
Code
-1
-2
Fan Mode
• When running ventilation, compressor of AHU
doesn't work.
• Ventilation mode does not release cool wind but
general fan.
- Because it releases the wind that has no
temperature difference from the room, it
functions to circulate the inside air.
• Natural wind based on chaos logic
- For a fresher feeling than other fan speeds,
press the Indoor Fan Speed Selector and set to
chaos mode. In this mode, the wind blows like
a natural breeze by automatically changing
fan speed based on the chaos logic.
• During Fan Mode
- The outdoor compressor doesn't work. Have a
function to circulate the indoor as it sends out
the air that doesn't have much temperature
difference with indoor.
Jet Mode
Use this mode to change the room temperature
more quickly.
1
Turn the appliance on.
2
Press the MODE button repeatedly to select
the Cooling mode.
• The Jet mode is available with Cooling
mode.
OPERATION
25
Description
A Little Hot
Hot
Advertisement
Table of Contents
