Epson Pro Cinema LS12000 - Home Theater Projector Quick Setup Guide

Also See for Pro Cinema LS12000:

Quick start manual (4 pages)

User manual (174 pages)

Table of Contents

Contents

1 Choose a location
2 Connect the device
3 Turn on your equipment
4 Using the remote control
5 Adjust the image
6 Troubleshooting
7 Registration
8 Where to get help
- 8.1 Internet support
- 8.2 Telephone support
9 Optional accessories
10 Supplier's Declaration of Conformity
11 Three-Year Product Limited Warranty
12 Documents / Resources
- 12.1 References
- 12.2 Download manual

Epson Pro Cinema LS12000 - Home Theater Projector Quick Setup Guide

Choose a location

Keep the projector level and place it at a height so its lens is even with the top or bottom of the screen and is centered horizontally. If this isn't possible, use the lens shift feature to reposition the image (see "Adjust the image").

Connect the device

Connecting the device
Connect multiple video devices and use the Source buttons on the remote control or the Source button on the projector to switch between them.

Note:

When projecting images at 4K 120Hz, use an HDMI 2.1 rated cable (ultra-high speed).
You can output audio to an external sound system that supports using the HDMI2 port.

Turn on your equipment

Plug in the projector.
Press the power button on the projector or the On button on the remote control. The shutter opens and the power light flashes blue, then stays on.

Note: To shut down the projector, press the power button on the projector or the Standby button on the remote control, then press the button again to confirm, if necessary. Wait for cooldown to complete before unplugging the projector.
Follow the on-screen instructions to set up your projector. If you see a screen displaying 123, press Enter on the remote control to continue. Use the arrow buttons to select the correct image orientation and press Enter.
Turn on your video source.
If you don't see an image, press one of the Source buttons on the remote control to select the image source.
Note: If you still see a blank screen or have other display problems, see the troubleshooting tips on this sheet.

Using the remote control

Installing the batteries in the remote control
Install the batteries as shown (two AA batteries).

Remote Control Overview

Adjust the image

Press the Pattern button on the remote control to display a test pattern.
Press the Lens button on the remote control and use the and buttons to focus the image.
Press the Lens button on the remote control again and use the and buttons to reduce or enlarge the image.
Press the Lens button on the remote control again and use the , , , and buttons to reposition the image.

Troubleshooting

If you see a blank screen or the No signal message after turning on your video device or computer, check the following:

Make sure the power light on the projector is blue and not flashing.
Press the Source button on the projector or one of the Source buttons on the remote control to switch to the correct image source, if necessary.
If you're using a Windows laptop, press the function key that lets you display on an external monitor. It may be labeled CRT/LCD or have an icon such as . You may have to hold down the Fn key while pressing it (such as Fn + F7). Wait a moment for the display to appear.
On Windows 7 or later, hold down the Windows key and press P at the same time, then click Duplicate.
If you're using a Mac laptop, open System Preferences and select Displays. Click the Arrangement tab and select the Mirror Displays checkbox.

Registration

Where to get help

Internet support

Visit http://epson.com/support/pcls12000 (U.S.) or http://epson.ca/support/pcls12000 (Canada) for solutions to common problems. You can download software and utilities, view manuals, get FAQs and troubleshooting advice, or contact Epson.

Telephone support

To use the Epson PrivateLine Support service, call (800) 637-7661. This service is available for the duration of your warranty period. You may also speak with a support specialist by calling (562) 276-4394 (U.S.) or (905) 709-3839 (Canada).

Support hours are 6 am to 8 pm, Pacific Time, Monday through Friday, and 7 am to 4 pm, Pacific Time, Saturday. Days and hours of support are subject to change without notice. Toll or long distance charges may apply.

Optional accessories

You can purchase accessories from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online at http://epsonstore.com (U.S. sales) or http://epsonstore.ca (Canadian sales).

Supplier's Declaration of Conformity

We: Epson America, Inc.
Located at: 3131 Katella Ave. Los Alamitos, CA 90720
Telephone: (562) 981-3840

Three-Year Product Limited Warranty

To find the Epson Authorized Reseller nearest you, please visit www.epson.com in the U.S. or www.epson.ca in Canada.

To find the Epson Customer Care Center nearest you, please visit www.epson.com/servicecenterlocator in the U.S. or www.epson.ca/servicecenterlocator in Canada.

To contact the Epson Connection, please call (800) 637-7661 or (562) 276-4394 in the U.S. and (905) 709-3839 in Canada, or write to Epson America, Inc., P.O. Box 93012, Long Beach, CA 90809-3012.

EPSON is a registered trademark and EPSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation.
PrivateLine is a registered trademark and Epson Connection is a service mark of Epson America, Inc.
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries.
Mac is a trademark of Apple Inc., registered in the U.S. and other countries.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks.
This information is subject to change without notice.