Epson CO-FH02, V11HA85020 - Smart Portable Projector Quick Setup Guide Manual

Contents

Before using this product, make sure you read these instructions and the safety instructions in the online User's Guide.

Make sure your projector box includes all of these parts:

Turn on your equipment

1. Turn on your computer or video source.
2. Plug in the projector. The status light blinks, then remains lit for a few seconds before turning off.
   
3. Install the batteries into both remote controls.
   
4. Press the power button on the projector or projector remote control.
   The projector beeps, the status light flashes blue, and then stays on.
   
   Note: To shut down the projector, press the power button twice on the projector or projector remote control.
   Follow the on-screen instructions to connect the streaming media player, pair the Android TV remote control, and then set up Android TV.

Note: The default language of the projector menu system is English. To select another language, press the menu button on the projector remote control. Use the directional pad and enter button to select Extended > Language, then select your language. Press the menu button to exit the menu system.

Connect the projector

Streaming media player

Connect the included streaming media player to your projector. To stream content, make sure you have a Google^® account, an internet connection, and an active streaming account and enter your login information as necessary for each app.
Note: The first time you set up the projector, a screen prompts you to connect the streaming media player.

1. Remove the side cover by pressing the tab and sliding the cover towards the rear of the projector.
   
2. Connect the HDMI extension cable to the HDMI port and the USB cable to the USB port, as shown.
   
3. Connect the HDMI and USB cables to the streaming media player and fit it into the port compartment.
   
4. Replace the side cover. The tab clicks into place when the cover is fully closed.
   

Video device or computer

Remove the side cover and connect an HDMI cable to the projector's HDMI port. Replace the side cover and route the HDMI cable through the slot in the back of the cover.

Note: You will have to remove the streaming media player in order to connect another device. For more information on connecting the projector to your computer or other devices (camera, USB flash drive, etc.), see the online User's Guide.

Adjust the image

1. Make sure the projector is turned on and displaying an image.
   Note: If you still see a blank screen or have other display problems, see the troubleshooting tips.
2. To raise the image, press the foot release button and lift the front of the projector. Release the button to lock the foot in position.
   
3. To reduce or enlarge the image, press the menu button on the projector remote control. Use the directional pad and enter button to select Settings > Installation > Zoom. Press left or right on the directional pad to adjust the image size. Press the menu button to exit the menu system.
4. To sharpen the image, turn the focus ring.
   
5. If your image looks like or or you may have placed the projector off to one side of the screen at an angle. Place the projector directly in front of the center of the screen, facing the screen squarely. If you can't move the projector, use the keystone button on the projector remote control to correct the image shape
6. Your projector automatically adjusts an image that looks like or , but if necessary you can press the keystone button on the projector remote control to correct it.

Note: For more adjustment methods, see the online User's Guide.

Using the remote control

Projector remote control

Android TV remote control

Note: You must pair the Android TV remote control to the included streaming device to adjust the Android TV volume and use the Google Assistant^TM feature. See the online User's Guide for more information.

Troubleshooting

• If you see a blank screen, check the following:
  • Press the A/V mute button on the projector remote control to see if the image was turned off.
  • Make sure the Status light on the projector is blue and not flashing.
  • Press the power button on the projector remote control to wake the projector from standby or sleep mode, if necessary.

• If you see a blank screen when a computer is connected, check the following:
  • On Windows^®, hold down the Windows key and press P at the same time, then click Duplicate.
  • If you are using a Mac laptop with macOS 12, select System Preferences > Displays > Display Settings. Select the projector, then choose the mirror option for your display from the drop-down menu.
    On macOS 11 and older, open System Preferences and select Displays. Click the Arrangement tab and select the Mirror Displays checkbox.
  • If the projector does not respond to the projector remote control, make sure the batteries in the projector remote control are installed correctly. Replace the batteries if necessary.
• If the Android TV streaming device does not respond to the remote control, try the following:
  • Make sure you are using the Android TV remote control and that it is paired with the streaming device.
  • The projector and Android TV remote control may have lost pairing. Perform pairing again by holding down the enter and volume down buttons on the Android TV remote control.
  • Press the power button on the Android TV remote control to make sure the streaming device is turned on.

Registration

Register today to get product updates and exclusive offers. You can register online at http://epson.com/webreg.

Where to get help

Manual

For more information about using the projector, you can view or download the online manual from the Epson website, as described below.

Internet support

Visit http://epson.com/support/cofh02 (U.S.) or http://epson.ca/support/cofh02 (Canada) to download software and utilities, view manuals, get FAQs and troubleshooting advice, or contact Epson.

Telephone support services

To use the Epson^® PrivateLine^® Support service, call (800) 637-7661. This service is available for the duration of your warranty period. You may also speak with a support specialist by calling (562) 276-4394 (U.S.) or (905) 709-3839 (Canada).

Support hours are 7 am to 4 pm, Pacific Time, Monday through Friday. Days and hours of support are subject to change without notice. Toll or long distance charges may apply.

Optional accessories

For a list of optional accessories, see the online User's Guide.

You can purchase screens or other accessories from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online at http://epsonstore.com (U.S. sales) or http://epsonstore.ca (Canadian sales).

Trade Name: Epson
Type of Product: LCD Projector
Model: HA85A
Marketing Name: CO-FH02