Epson CO-W01, V11HA86020 - Smart Portable Projector Quick Setup Guide Manual

Contents

Before using the projector, make sure you read these instructions and the safety instructions in the online User's Guide.
Make sure your projector box includes all of these parts:

You can place the projector on almost any flat surface or attach it to a tripod or other hardware with an optional mount. See the online User's Guide for more information.

Connect the projector

Video device or computer

You can connect video equipment or a computer. Connect one end of an HDMI cable to the projector's HDMI port and the other end to an HDMI port on your video device or computer. See the online User's Guide for details.

Do not turn on the video source before connecting it to the projector; you may damage the projector.

USB device

You can connect a supported digital camera, USB flash drive, or USB storage device to the projector's USB-A port, and then use the projector's PC Free feature. See the online User's Guide for details.

Streaming media player

You can connect a streaming media player (not included) to your projector.

Turn on your equipment

1. Turn on your computer or video source.
2. Plug in the projector. The status light blinks, then remains lit for a few seconds before turning off.
   
3. Insert the batteries into the remote control.
   
4. Press the power button on the projector or the remote control. The status light flashes blue and then stays on.
   
5. If you connected an active source, the projector displays the source. Otherwise, the Home screen is displayed. If necessary, select the active source to display the image. Press the home button to return to the Home screen.
   
6. The default language of the menu system is English. To select another language, press the menu button on the remote control. Use the directional pad and enter button to select Extended > Language, then select your language. Press the menu button to exit the menu system.

Note: To shut down the projector, press the power button twice.

Adjust the image

1. Make sure the projector is turned on and displaying an image.
   Note: If you still see a blank screen or have other display problems, see the troubleshooting tips.
2. To reduce or enlarge the image, press the menu button on the remote control. Use the directional pad and enter button to select Settings > Installation > Zoom. Press left or right on the directional pad to adjust the image size. Press the menu button to exit the menu system.
3. To adjust the image height, press and hold the foot release lever on the bottom of the projector to extend the front adjustable foot. Release the lever to lock the foot in the desired position.
   
4. Move the focus lever on top of the projector left or right to adjust the image sharpness.
   
5. If your image looks like or , you may have placed the projector off to one side of the screen at an angle. Place the projector directly in front of the center of the screen, facing the screen squarely. If you can't move the projector, use the keystone button on the remote control to correct the image shape.
6. If your image looks like or , press the keystone button on the remote control and adjust the V-Keystone setting to correct it.

Note: For more adjustment methods, see the online User's Guide.

Using the remote control

Troubleshooting

• If you see a blank screen, check the following:
  • Make sure your computer or video device is properly connected.
  • Make sure the status light on the projector is blue and not flashing.
  • Press the power button or the A/V mute button on the projector or remote control to wake the projector from standby or sleep mode, if necessary.
• If you see a blank screen when a computer is connected, check the following:
  • On Windows^®, hold down the Windows key and press P at the same time, then click Duplicate.
  • If you are using a Mac laptop with macOS 12, select System Preferences > Displays > Display Settings. Select the projector, then choose the mirror option for your display from the drop-down menu.
    On macOS 11 and older, open System Preferences and select Displays. Click the Arrangement tab and select the Mirror Displays checkbox.
• If the projector does not respond to remote control commands, make sure the batteries in the remote control are installed correctly. Replace the batteries, if necessary.

Registration

Register today to get product updates and exclusive offers. You can register online at http://epson.com/webreg.

Where to get help

Manual

For more information about using the projector, you can view or download the online manual from the Epson website, as described below.

Internet support

Visit http://epson.com/support/cow01 (U.S.) or http://epson.ca/support/cow01 (Canada) to download software and utilities, view the manual, get FAQs and troubleshooting advice, or contact Epson.

Telephone support services

To use the Epson^® PrivateLine^® Support service, call (800) 637-7661. This service is available for the duration of your warranty period. You may also speak with a support specialist by calling (562) 276-4394 (U.S.) or (905) 709-3839 (Canada).

Support hours are 7 am to 4 pm, Pacific Time, Monday through Friday. Days and hours of support are subject to change without notice. Toll or long distance charges may apply.

Optional accessories

For a list of optional accessories, see the online User's Guide.

You can purchase screens or other accessories from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online at http://epsonstore.com (U.S. sales) or http://epsonstore.ca (Canadian sales).

EPSON is a registered trademark and EPSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation.