Table of Contents
Advertisement
Operation Tips!
Do not overcool the room.
This is not good for the health
and wastes electricity.
Make sure that the doors
and windows are shut tight.
Avoid opening doors and
windows as much as possible to
keep the cool air in the room.
When the air conditioner is not
going....
When air conditioner is not going
to be used for a long time.
1
Operate the air conditioner at the following
settings for 2 to 3 hours.
- Type of operation: Fan operation mode.
- This will dry out the internal mechanisms.
2
Turn off the breaker.
!
CAUTION
Turn off the breaker when the air conditioner
is not going to be used for a long time.
Dirt may collect and may cause a fire.
3
Remove the batteries from the Remote
Controller.
Keep blinds or curtains
closed.
Do not let direct sunshine enter
the room when the air
conditioner is in operation.
Clean the air filter regularly.
Blockages in the air filter reduce
the airflow and lower cooling
and dehumidifying effects.
Clean at least once every two
weeks.
Helpful information
The air filters and your electiric bill.
If the air filters become clogged with dust, the
cooling capacity will drop, and 6 % of the
electricity used to operate the air conditioner will
be wasted.
When the air conditioner is to be
used again.
1
Clean the air filter and install it in the indoor
unit.
2
Check that the air inlet and outlet of the
indoor/outdoor unit are not blocked.
3
Check that the ground wire is connected
correctly. It may be connect to the indoor unit
side.
MAINTENANCE AND SERVICE
Keep the room temperature
uniform.
Adjust the vertical and
horizontal airflow direction to
ensure a uniform temperature in
the room.
Ventilate the room
occasionally.
Since windows are kept closed,
it is a good idea to open them
and ventilate the room now and
then.
43
Advertisement
Table of Contents
![Air Conditioner LG ATNH24GPLED[UT24 NPD] Service Manual](https://static-data2.manualslib.com/product-images/c1f/692972/60x60/lg-atnh24gpled-ut24-npd-air-conditioner.jpg)
