Safety instructions Please read these safety precautions carefully before using the product. Make sure to connect Mains cable to compliant AC mains socket with Grounded earth pin. (Except for devices which are not grounded on WARNING earth.) Otherwise possibility you may be electrocuted or injured. Do not place the TV and/or remote control in the following Insert power cable plug completely into wall socket otherwise if not environments:...
Page 11
Do not drop the product or let it fall over when connecting external Do not drop metallic objects such as coins, hair pins, chopsticks or wire devices. Otherwise, this may result in injury or damage to the product. into the product, or inflammable objects such as paper and matches. Children must pay particular attention.
Page 12
Only use an authorized AC adapter and power cord approved by If you install the TV on a stand, you need to take actions to prevent the LG Electronics. Otherwise, this may result in fire, electric shock, product from overturning. Otherwise, the product may fall over, which malfunction or product deformation.
Page 13
When installing the antenna, consult with a qualified service When connecting external devices such as video game consoles, make technician. If not installed by a qualified technician, this may create a sure the connecting cables are long enough. Otherwise, the product fire hazard or an electric shock hazard.
Page 14
Protect the power cord from physical or mechanical abuse, such as When moving the product, make sure you turn the power off first. being twisted, kinked, pinched, closed in a door, or walked upon. Pay Then, unplug the power cables, antenna cables and all connecting particular attention to plugs, wall outlets, and the point where the cord cables.
Page 15
Preparing NOTE You may find different brightness and color of the panel depending on • If the TV is turned on for the first time after it was shipped from the your viewing position(left/right/top/down). factory, initialization of the TV may take a few minutes. This phenomenon occurs due to the characteristic of the panel.
Separate purchase Separate purchase items can be changed or modified for quality improvement without any notification. Contact your dealer to buy • When transporting the TV, do not expose the TV to jolts or these items. These devices only work with certain models. The model excessive vibration.
Basic functions Securing the TV to a wall (This feature is not available for all models.) Power On (Press) Power Off (Press and hold) Volume Control Programmes Control 1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV.
We recommend the use systems, USB storage devices, PC, gaming devices, and other external of LG’s wall mount bracket. LG’s wall mount bracket is easy to move with devices. cables connected. When you do not use LG’s wall mount bracket, please...
Antenna connection Speaker output setup Connect the TV to a wall antenna socket with an RF cable (75 Ω). (Depending on model) • Use a signal splitter to use more than 2 TVs. • If the image quality is poor, install a signal amplifier properly to improve the image quality.
Network setup Other connections Connect your TV to external devices. For the best picture and audio Wired network connection quality, connect the external device and the TV with the HDMI cable. Some separate cable is not provided. (Depending on model) This TV can be connected to a Pro:Centric server via the LAN port.
(POWER) Turns the TV on or off. Adjusts the brightness of the screen to reduce Shows programme guide. energy consumption. Displays and removes hotel interactive menu. By zooming in on the selected area, you can view it Views the information of the current programme and in full screen.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com.
Specifications Wireless module specification • As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional frequency table. • For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the body. Wireless module (LGSBWAC61) specifications Wireless LAN (IEEE 802.11a/b/g/n/ac) Frequency Range...
Page 24
HDMI-PC supported Mode HDMI-DTV supported mode • PC audio is not supported Horizontal Vertical Frequency • Use HDMI IN 1 for PC mode Resolution Frequency (kHz) (Hz) Horizontal Vertical Frequency Resolution 31.47 59.94 Frequency (kHz) (Hz) 720 x 480 31.50 60.00 640 x 350 31.46...
Photo format Video codec File Extension Codec Format Resolution Format VC-1 Advanced Profile (WMVA Minimum: 64 (W) x 64 (H) Video excluded), VC-1 Simple and Main Maximum(Normal Type): .asf .jpeg, Profiles JPEG 15360 (W) x 8640 (H) .wmv .jpg, .jpe WMA Standard (WMA v1/WMA Speech Maximum (Progressive Type): Audio...
Page 26
Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service. MODEL SERIAL...
Page 27
IR CODES This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) Remote control Button (Power Remote control Button (POWER) On/Off) Remote control Button (BACK) Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button...
EXTERNAL CONTROL Type of Connector : D-Sub 9-Pin Male DEVICE SETUP RS-232C Setup • Image shown may differ from your TV. Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally.
Command Reference List RS-232C Configurations (Depending on Model) 7-Wire Configurations (Standard RS-232C cable) DATA COMMAND1 COMMAND2 (Hexadecimal) 01. Power 00 to 01 02. Aspect Ratio (See p. 4) 03. Screen Mute (See p. 5) 04. Volume Mute 00 to 01 05.
Transmission / Receiving Protocol 01. Power (Command: k a) ► To control Power On/Off of the set. (Depending on Model) Transmission [k][a][ ][Set ID][ ][Data][Cr] Transmission Data 00 : Power Off 01 : Power On [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV.(j, k, m or x) [a][ ][Set ID][ ][OK/NG][Data][x] [Command 2] : Second command to control the TV.
Page 31
06. Contrast (Command: k g) 03. Screen Mute (Command: k d) ► To select screen mute on/off. ► To adjust screen contrast. You can also adjust contrast in the PICTURE menu. Transmission [k][d][ ][Set ID][ ][Data][Cr] Transmission [k][g][ ][Set ID][ ][Data][Cr] Data 00 : Screen mute off (Picture on) Video mute off...
Page 32
09. Tint (Command: k j) 12. Remote control lock mode (Command: k m) ► To adjust the screen tint. ► To lock the front panel controls on the monitor and remote control. You can also adjust tint in the PICTURE menu. Transmission Transmission [k][m][ ][Set ID][ ][Data][Cr]...
14. Colour Temperature (Command: x u) 16. Auto Configuration (Command: j u) (Only RGB support model) ► To adjust colour temperature. You can also adjust Colour ► To adjust picture position and minimize image shaking Temperature in the PICTURE menu. automatically.
20. Key (Command: m c) 18. Tune Command (Command: m a) ► To send IR remote key code. ► Select channel to following physical number. Transmission Transmission [m][c][ ][Set ID][ ][Data][Cr] [m][a][ ][Set ID][ ][Data 00][ ][Data 01][ ][Data 02][Cr] Data 00 : High channel data Data IR CODES...
Page 35
Input Number Data Input1 Input2 Input3 Input4 [b][ ][Set ID][ ][OK/NG][Data][x] * Real data mapping 00 : Step 0 Step 10 (Set ID 10) Step 15 (Set ID 15) 10 : Step 16 (Set ID 16) 64 : Step 100 6E : Step 110 73 :...