Table of Contents
Advertisement
POSITION OF CONSOLE BOLT
- A place where the unit will be leveled and
that can support the weight of the unit.
- A place where the unit can withstand its
vibration.
- A place where service can be easily
performed.
<TYPE A>
M10 Nut
M10 washer
M10 washer
M10 Nut
<TYPE B/C>
M10 Nut
M10 SP. washer
M10 washer
M10 washer
M10 SP. washer
M10 Nut
X 4
X 4
X 4
X 8
X 4
(Local
X 4
supply)
X 4
X 4
(Local
X 4
supply)
X 4
Indoor Unit Installation
- Select and mark the position for fixing bolts.
- Drill the hole for set anchor on the face of
ceiling.
- Insert the set anchor and washer onto the
suspension bolts for locking the suspension
bolts on the ceiling.
- Mount the suspension bolts to the set
anchor firmly.
- Secure the installation plates onto the
suspension bolts (adjust level roughly) using
nuts, washers and spring washers.
Old building
1 Set anchor
2 Plate washer
3 Spring washer
4 Nut
5 Suspension
bolts
• Local supply
① Set anchor
② Plate washer
③ Spring washer
④ Nut
⑤ Suspension bolt - W3/8 or M10
!
CAUTION
Tighten the nut and bolt to prevent unit
falling.
INSTALLATION
9
New building
- M10
- M10
- W3/8 or M10
Hide quick links:
Advertisement
Table of Contents
