Table of Contents
Advertisement
CASE 2
• Install the unit leaning to drainage hole side as a
figure for easy water drainage.
POSITION OF CONSOLE BOLT
• A place where the unit will be leveled and can
support the weight of the unit.
• A place where the unit can withstand its vibration.
• A place where service can be easily performed.
• Select and mark the position for fixing bolts.
• Drill the hole to set anchor on the face of ceiling.
• Insert the set anchor and washer onto the
suspension bolts for locking the suspension bolts
on the ceiling.
• Mount the suspension bolts to the set anchor
firmly.
• Secure the installation plates onto the suspension
bolts (adjust level roughly) using nuts, washers
and spring washers.
CAUTION
Tighten the nut and bolt to prevent
unit falling
M10 Nut
M10 SP. washer
M10 washer
M10 washer
M10 SP. washer
M10 Nut
Old building
1 Set anchor
2 Plate washer
3 Spring washer
4 Nut
5 Suspension
bolts
• Local supply
Set anchor
Plate washer
Spring washer
Nut
Suspension bolt
Service Manual 63
Installation
X 4
(Local
X 4
supply)
X 4
X 4
(Local
X 4
supply)
X 4
New building
- M10
- M10
- W3/8 or M10
- W3/8 or M10
Hide quick links:
Advertisement
Table of Contents
