Extras ... 53 My stuff ... 55 Customer Care ... 56 Care and maintenance ... 58 Product data ... 59 Guarantee certificate (UK) ... 60 Guarantee certificate (IRL) ... 61 SAR ... 63 Menu tree ... 64 Index ... 70 www.siemens.com/m65...
Do not use an optical magnifier to look at the activated infrared interface [Class 1 LED product (classification as per IEC 60825-1)]. Only use original Siemens charging devices and batteries (100 % mercury-free). Other- wise you risk serious damage to health and property. The battery could explode, for instance.
Page 4
Mobile phones can interfere with the operation of nearby TVs, radios or PCs. Use only original Siemens accessories. This will avoid potential risks to health or prop- erty and ensure compliance with all relevant regulations.
Overview of the phone On/Off/End key • Switched off: press and hold to switch • During a conversation or in an appli- cation: press briefly to finish. • In menus: press briefly to go back a level. Hold down to return to standby mode. •...
Page 6
Loudspeaker LED for dynamic light (p. 42) Infrared interface (IrDA) Ringtone • Hold down in standby mode: Switch all audible signals on/off (except alarm). • Hold down on incoming call: Switch off ringtone for this call only. Key lock Hold down in standby mode: Switch key lock on/off.
Display symbols Display symbols (selection) Signal strength Battery charge level, e.g. 50 % Phonebook Call records Surf & fun/ Service provider portal Organiser Messages Camera Extras My stuff Setup All calls diverted Ç Ringing tone off ¿ Short ring (beep) only ¾...
Getting started The phone must be assembled before you can get started. SIM card and battery • Place the SIM card in front of the slot with the contact surface fac- ing downwards. Then slide the SIM into the holder •...
Page 9
Metal bracket • Slide the metal bracket open until the openings in the metal bracket and in the cover are directly above each other . The hooks must engage in the openings on the front of the phone. • Insert the locking catch into the metal bracket and turn it ninety degrees to the right...
Charge battery Charging procedure The battery is not fully charged when delivered. Plug charger cable into the bottom of the phone, plug power supply unit into a mains power socket and charge for at least two hours. Display during charging. Charging time An empty battery is fully charged after about 2 hours.
Switching phone on and off/entering PIN Switching phone on/off Hold key down. Entering the PIN The SIM card can be protected with a 4 to 8-digit PIN. Enter the PIN using the number keys. The charac- ters **** ensure nobody can read your PIN on the display.
General instructions Standby mode The phone is in standby mode and is ready for use when the name of the service provider appears on the dis- play. By pressing and holding, you can return to standby mode from any situation. Signal strength Strong signal.
User guide Menu controls The steps needed to reach a function are shown in a condensed form in the user guide, e.g. to display record of missed calls in condensed form: ¢ ¢ Calls missed This comprises the following steps: Open main menu.
Standard functions Option menus List of functions repeatedly appear- ing in options menus. Open menu. §Options§ Edit Open the entry to edit. View Display entry. Delete all Delete entry/delete all entries after confirmation. New entry Create new entry. Send... Select transmission serv- ice and medium for send- ing or printing.
Security The phone and SIM card are pro- tected against misuse by several security codes. Keep these security codes in a safe place where you can access them again if required. Codes Protects your SIM card (Personal Identification Number). PIN2 This is needed to set the charge detail display and to access additional functions on special...
If this occurs, contact the Siemens Service (p. 56). Clear SIM card barring If the PIN is entered incorrectly three times, the SIM card is barred. Enter...
Text entry Text entry without T9 Press number key repeatedly until the required letter appears. Exam- ple: Press once briefly to write the letter a, twice to type b etc. Press and hold to write the number. Press briefly to delete the letter before the cursor.
Write with T9 It is best if you finish a word without look- ing at the display. You simply press the keys where the relevant letter is located once only. A blank space or moving to the right ends the word.
Calling Enter the number (always with area/international dialling code). A short press clears the last digit, a long press clears the entire phone number. Dial phone number. End call Press the End key briefly. Set volume Press upwards/down- wards in order to regulate the volume.
Call options Functions which are only §Options§ available during the call are offered. Swapping between two calls Establish a second connection Open menu. §Options§ Hold current call, then Hold dial the new phone number. Open menu. §Options§ Swap between calls. Swap Incoming calls during a call You will hear a "call waiting tone"...
Default book ¢ ¢ Select function. Show entries The entries in the standard directory (Addressbook or Phonebook) are shown. Select a name with the first letter and/or scroll. New entry Create new entry. (see also p. 21) Addressbook (see also p. 23) Phonebook Default book You can set which directory you pre-...
Addressbook The Addressbook can store up to 1000 entries, each with a variety of telephone and fax numbers as well as additional address details. These entries are managed in the phone memory separately from those in the Phonebook. New entry The Addressbook is set as standard: Open Addressbook (in standby mode).
Display/find entry Open Addressbook (in standby mode). Select required entry. Display. Display options §Options§ Displays functions for the selected input field. Change entry Open Addressbook (in standby mode). Select entry and press §Edit§. Select input field and, if applicable, press §Edit§. Make changes, then §Save§.
Phonebook Entries in the Phonebook (on the SIM card) are managed separately from those in the Addressbook. New entry If the Phonebook has been selected as standard: Open Phonebook (in standby mode). Select <New Display input fields. Navigate between and fill in the input fields.
Change entry Open Phonebook (in standby mode). Select entry in Phone- book. Press. §Edit§ Select desired input field. Make changes. Press. §Save§ Phonebook options The following functions are availa- ble, depending on the current situa- tion. §Options§ Open menu. Copy into 9 Copy all highlighted entries to the Address- book.
Call records Phone numbers are saved to make it easier to redial them. ¢ Select record. Open call record. Select phone number. Dial phone number. 10 phone numbers can be stored in each call record: Calls missed The phone numbers of calls that you have received but not answered are stored for call back purposes.
Camera You can view photos/videos recorded on the integrated camera immediately and • use the photo as a background image, logo, a switch on/off animation or a screensaver. • send the photo/video via MMS or e-mail. Switch on ¢ Start camera in standby mode.
Video mode The video mode resolution is the same as the preview image resolu- tion. Start the video recording. End the video recording. A red dot appears in the top right of the display while the video recording is being made. Plays the video recording.
This function is not supported by all service providers. Please contact Business card. your service provider for more infor- mation. You will find a description in the comprehensive operating instructions on the Internet at: www.siemens.com/m65 are each dis- SMS, MMS E-mail ¢ ¢ Inbox ¢...
You can transmit and receive very long messages (up to 760 characters). They are automati- cally composed of several "normal" SMS messages (note higher charges). Additionally you can insert pictures and sounds in an SMS. Write/send ¢ ¢ Write message Enter text (see also p.
Page 31
SMS to group You can send an SMS message to a recipient group. Open menu. §Options§ Send Select. The list of groups is dis- §Group§ played. Select group. Open group and highlight all/individual entries. Sending is started after a security prompt. Read Arrival of a new SMS announced in the display.
The Multimedia Messaging Service enables you to send texts, pic- tures/videos and sounds in a com- bined message to another mobile phone or to an e-mail address. Depending on your telephone set- ting, you will either receive the com- plete message or only a notification with sender details and size.
Page 33
Save as After creating MMS, save it templ. as a template. See also below. Layout Select one of four possible layouts: Text above, beneath, beside (on left or right of) picture. Colours Select the colours for: • Message • Page •...
Sending options Open menu. §Options§ Send MMS Send MMS. Play Play entire MMS on the dis- play. Edit Display object selection to change an object. Add recipient from the cur- recipient rent address directory. Delete Delete individual recipient. recip. Add attachment: attachm.
Setting ¢ ¢ Message setup ¢ Select function. MMS profile: Six MMS profiles can be set. The sending properties are specified in these profiles. In most cases, the set- ting are preloaded. If necessary, check with your service provider for details.
Most of this data has already been entered or may be obtained from your service provider. See also on the Internet at: www.siemens.com/m65 Activate access Account sett. §Edit§ Only the message header is sent.
Voice message/CB Voice message ¢ ¢ Setup ¢ Voice message If you have a mailbox, a caller can leave a voice message for you • if your phone is switched off or not ready to receive, • if you do not want to answer, •...
Surf & fun Get the latest information from the Internet that is specifically adapted to the display options of your phone. In addition, you can download games and applications to your phone. Internet access may require registration with the service pro- vider.
Display symbols in the browser Connect ² ´ Network ± ³ Enter special characters Select important special characters. Browser settings ¢ ¢ Internet Open menu. §Options§ Select. Setup Browser Set start option as well as handling of pictures and tones and send options. Profiles The list of profiles is dis- played for activation/setting...
Java™-enabled mobile phone. Siemens excludes all warranty and liability claims in respect of or in connection with any applica- tions subsequently installed by the customer and any software not included in the original delivery package.
Car Kit If an original Siemens Car Kit is used, the profile is switched on automati- cally as soon as the phone is inserted into the cradle (also see accessories).
Page 42
Themes ¢ ¢ Themes Load a completely new visual pres- entation onto your phone. With the press of a key, various functions are re-organised on a topic basis, e.g. switch on/off animation, back- ground image, screensaver, switch on/off melody, additional anima- tions.
Screensaver The screensaver shows a picture in the display as set by you. An incom- ing call and/or pressing any key will end the function except if the safety function is activated. Start up anim. Shown when the phone is switched Shutdn anim.
Ringer setting Activate/deactivate the ringer or reduce it to a short beep. Silent alert To avoid the disturbance caused by a ringing phone, you can activate the silent alert function as an alterna- tive. The vibration alarm can be switched on in addition to the ring- tone.
All calls All calls are diverted. Icon in the top line of the display in standby mode. Ç Other possibilities for divert: reachable, reply, Busy, fax, Receiving data Call screening Only calls from phone numbers that are in the Phonebook/Addressbook or assigned to a group are signalled.
Memory assis. The delete assistant will help you if there is insufficient phone memory. File system Format (Phonecode-protected) The phone memory is formatted and all saved data such as ringtones, pic- tures, games etc. are deleted. Clean up Create more memory by deleting temporary files no longer required.
Page 47
The phone default set- ting varies from service provider to service provider. Consult your serv- ice provider or go to this address in the Internet for more information www.siemens.com/ mobilephonescustomercare in the "FAQ" section. HTTP profile The phone default setting varies from service provider to service pro- vider.
Security ¢ ¢ Security ¢ Select function. Auto key lock The keypad is locked automatically if no key has been pressed for one minute in standby mode. This pre- vents the phone from being used accidentally. However, you can still be called and you can still make an emergency call.
Page 49
¢ ¢ Select function. Car Kit Only in combination with an original Siemens handsfree car kit (see accessories). The car kit profile is activated automatically as soon as the phone is inserted into the cradle. Auto answer (factory default: off) Calls are accepted automatically after a few seconds.
Page 50
Improves playback in certain circum- stances. Headset Only in conjunction with an original Siemens headset (see accessories). If an original Siemens headset is used the profile is automatically activated when the headset is plugged in. Auto answer (factory default: off)
Fast access Soft keys Assign one phone number or func- tion to each of the two soft keys. Change For example, the Internet assigned to the soft key. To change this (in standby mode): Press briefly, then §Change§. §Internet§ Select a new function from the list and confirm with Apply...
Organiser ¢ ¢ Select function. Calendar You can enter appointments in the calendar. Time and date must be set correctly. The calendar offers you three views: monthly view, weekly view, daily view. The various entries are colour- coded. Appointments are shown as a vertical colour bar on the horizontal hour division.
¢ ¢ Select function. Tasks A task is displayed like an appoint- ment in the agenda of the selected day. However, unlike an appoint- ment it does not require a time. When no time is entered the task appears at the top of the list every day until it is marked as completed.
Extras ¢ ¢ Select function. SIM services (optional) SIM services Your service provider may offer applications such as mobile banking, share prices, etc. via the SIM card. Symbol for SIM services. For further information, please con- tact your service provider. Alarm clock The alarm will ring at the time set by you, even when the phone is...
¢ ¢ Select function. Calc. The calculator can be used in a basic version with an extended range of functions (§Options§). Enter digit(s). Navigate functions. Use function. Unit converter You can convert various measurement units into other measurement units. Select the source unit/cur- rency, then enter the quantity.
My stuff To organise your files, you have a file management function at your dis- posal. This functions in the same way as on a PC. Folders have already been created for different data types. ¢ The list of the folders and files is dis- played.
You can also get personal advice about our range of products on our Premium Hotline: United Kingdom ... 0906 9597500 (0.75 £ per minute) Qualified Siemens employees are waiting to offer you expert information about our products and installation. In some countries repair and replace servic- es are impossible where the products are not sold through our authorised dealers.
Care and maintenance Your phone has been designed and crafted with great care and attention and should also be treated with care. The suggestions below will help you to enjoy your phone for many years. • Protect your phone from moisture and humidity! Precipitation, humidity and liq- uids contain minerals that will corrode electronic circuits.
Product data Declaration of conformity Siemens Information and Communi- cation mobile hereby declares that the phone described in this user guide is in compliance with the essential requirements and other rel- evant provisions of European Direc- tive 1999/5/EC (R&TTE). The declara- tion of conformity (DoC) concerned has been signed.
• In the case of new devices and their components exhibiting de- fects resulting from manufactur- ing and/or material faults within 24 months of purchase, Siemens shall, at its own option and free of charge, either replace the device with another device reflecting the current state of the art, or repair the said device.
• This Guarantee shall apply to new devices purchased in the Europe- an Union. For Products sold in the Republic of Ireland the Guarantee is issued by Siemens Ireland Limit- ed, Ballymoss Road, Sandyford In- dustrial Estate, Dublin 18 - The Republic of Ireland.
Page 63
Guarantee. • Insofar as no Guarantee default exists, Siemens reserves the right to charge the customer for re- placement or repair. • The above provisions does not im-...
'hands-free' device to keep the mobile phone away from the head and body. Additional Information can be found on the websites of the World Health Organization (www.who.int/emf) or Siemens (www.siemens.com/mobilephones).
Menu tree > Show entries Addressbook/ Phonebook <New entry> Business card Groups Default book <Info numbers> > Calls missed Call records Calls received Calls dialled Delete records Time/charge > URL/service provider Surf & fun Games Applications Downl. assist. Bookmarks Internet Camera >...
Page 68
> Display Setup Dynamic light Ringtones Call setup > Own greeting Big letters Illumination > Ringer setting Silent alert Volume Calls Group calls Other calls More melodies > Hide ID Call waiting Divert Call screening Any key answ. Minute beep >...
Page 69
> Phone setup Setup Clock Connectivity Security > Key tones Info tones Automatic switch off Phone identity Memory assis. File system Master reset > Time/date Time zones Date format Time format Buddhist year Show clock Auto time zone > GPRS GPRS info IrDA Data services...
Page 70
> Security Setup Network Accessories > Barrings > Line Network info Choose netwrk Auto network Pref. network Band selection Fast search User group > Car Kit Key assignm. Headset > All outgoing Outgoing intl. Out.int.x.home All incoming When roaming Status check Clear all >...