[Class 1 LED product (classification as per IEC 60825-1)]. Only use original Siemens bat- teries (100 % mercury-free) and – charging devices. Otherwise you risk serious damage to health and property. The battery could explode, for instance.
Page 5
The phone may cause interfer- ence in the vicinity of TV sets, radios and PCs. Use only Siemens original accessories. This will avoid potential risks to health or prop- erty and ensure compliance with all relevant regulations.
Overview of the phone On/Off/End key • Switched off: press and hold to switch on. • During a conversation or in an appli- cation: press briefly to finish. • In menus: press briefly to go back a level. Hold down to return to standby mode. •...
Page 7
Overview of the phone Loudspeaker LED for dynamic light (p. 78) Infrared interface (IrDA) Ringtone • Hold down in standby mode: Switch all audible signals on/off (except alarm). • Hold down on incoming call: Switch off ringtone for this call only. Key lock Hold down in standby mode: Switch key lock on/off.
Display symbols Display symbols (selection) Signal strength Charging Battery charge level, e.g. 50 % Phonebook Call records Surf & fun/ Service provider portal Organiser Messages Camera Extras My stuff Setup All calls are diverted Ç Signal tone off ¿ Short ring (beep) only ¾...
Page 9
Display symbols Message symbols (selection) Unread Read Draft Sent Unsent Forwarded With DRM contents (p. 13) With attachment MMS received MMS read Voice mail received À Camera symbols Switch between photo and Ø video Brightness Ù Zoom factor Ú White balance Û...
Getting started The phone must be assembled before you can get started. SIM card and battery • Place the SIM card in front of the slot with the contact surface fac- ing downwards. Then slide the SIM into the holder •...
Page 11
Getting started Metal bracket • Slide the metal bracket open until the openings in the metal bracket and in the cover are directly above each other . The hooks engage in the openings on the front of the phone. • Insert the locking catch into the metal bracket and turn it ninety degrees to the right...
Charge battery Charging procedure The battery is not fully charged when delivered. Plug the charger cable into the bottom of the phone, plug the power supply unit into a mains power socket and charge for at least two hours. Display during charging. Charging time An empty battery is fully charged after about 2 hours.
Switching phone on and off/entering PIN Switching phone on and off/entering PIN Switching phone on/off Hold down the On/Off/End key. Entering the PIN The SIM card can be protected with a 4 to 8-digit PIN. Enter the PIN using the number keys.
General instructions Standby mode The phone is in standby mode and is ready for use when the name of the service provider appears on the dis- play. Hold down the On/Off/End key to return to standby mode from any situation. Signal strength Strong signal.
General instructions User guide Menu controls The steps needed to reach a function are shown in a condensed form in the user guide, e.g. to display record of missed calls in condensed form: ¢ ¢ Calls missed This comprises the following steps: Open main menu.
Standard functions Option menus Functions which appear repeatedly in the options menu are listed here. Open menu. §Options§ Edit Open the entry to edit. View Display entry. Delete/ Delete entry/delete all Delete all entries after confirmation. New entry Create new entry. Send...
Standard functions Highlighting mode With some applications (e.g. Phone- book/Addressbook) one or more entries in a list can be highlighted to carry out a function jointly. §Options§ Open menu. Activate highlighting Mark mode. If a non-highlighted entry is selected, this can be highlighted: The current entry is high- §Mark§...
Security The phone and SIM card are pro- tected against misuse by several security codes. Keep these security codes in a safe place where you can access them again if required. Codes Protects your SIM card (Personal Identification Number). PIN2 This is needed to set the charge detail display and to access additional functions on special...
If this occurs, contact the Siemens Service (p. 117). Clear SIM card barring If the PIN is entered incorrectly three times, the SIM card is barred. Enter...
Text entry Text entry without T9 Press number key repeatedly until the required letter appears. After a brief interval the cursor will advance. Example: Press once briefly to write the letter a, twice to type b etc. Hold down to write the number.
Text entry Input menu With text input: Hold down. The input menu is displayed: Text format Input language Mark Copy/Insert Text entry with T9 "T9" deduces the correct word from the individual key entries by making comparisons with an extensive dic- tionary.
Page 22
T9 word suggestions If several options are found in the dictionary for a key sequence (a word), the most probable is dis- played first. If the word you want has not been recognised, the next sug- gestion from T9 may be correct. The word must be shown §highlighted§.
Page 23
Text entry Text modules Text modules can be stored in the phone for adding to your messages (SMS, MMS, e-mail). Write text module ¢ ¢ Text modules Select §Options§ Write text. Open menu and select §Options§ Save. Accept the specified name or allocate a new one.
Where do I get what? You can purchase additional ring- tones, logos, animations and Java applications from your service pro- vider or directly from Siemens. Service provider portal Depending on your service provider, you will find direct access to his por- tal on your telephone via menu items or bookmarks.
Calling Calling Dialling with number keys The phone must be switched on (standby mode). Enter the number (always with area/international dialling code). A short press clears the last digit, a long press clears the entire phone number. Press the Call key. The dis- played phone number is dialled.
If the number is busy If the called number is busy or can- not be reached because of network problems several options are availa- ble (depending on the service pro- vider). An incoming call or any other use of the phone interrupts these functions.
Calling Accept call The phone must be switched on. An incoming call will interrupt any other use of the phone. Press. Press. A phone number transmitted by the network plus the corresponding name (possibly with a picture) are displayed if they are stored in the Phonebook/Addressbook (p.
Page 28
Incoming calls during a call You may need to register for this service with your service provider and set your phone accordingly (p. 81). During a call, you may be advised that there is another call waiting. You will hear a special tone during the call.
Calling Call options The following functions are only available during a call: Open menu. §Options§ Hold Hold current call. Microphone If switched off, the person on the other end of the line cannot hear you (muting). Also: Handsfree Playback from loud- speaker.
Page 30
Tone sequences (DTMF) You can, for example, enter control codes (numbers) for remote access to an automatic answering machine while another connection exists. These entries are transmitted directly as DTMFcodes (control codes). Open menu. §Options§ Send DTMF Select. Using the Phonebook/Address- book Store phone numbers and control codes (DTMF codes) in the Phone-...
Default book Default book ¢ ¢ Select function. Show entries The entries in the standard directory (Addressbook or Phonebook) are shown. Select a name with the first letter and/or scroll. New entry Create new entry. (see also p. 31) Addressbook (see also p.
Addressbook The Addressbook can store up to 1000 entries, each with a variety of telephone and fax numbers as well as additional address details. These entries are managed in the phone memory separately from those in the Phonebook. However, you can exchange data between the Address- book and the Phonebook on the SIM card.
Temporary switch to Phone- Î book. Synchronisation With the mobile phone manager (p. 112), you can synchronise your Addressbook with Outlook® and other Siemens telephones. Using Remote sync. you can synchronise your mobile with an organiser stored on the Internet (see also p. 107).
Change entry Open Addressbook (in standby mode). Select required entry. Press. §Edit§ Select input field. Open entry if necessary. §Edit§ Make changes. Save. §Save§ Call entry Open Addressbook (in standby mode). Select a name with the first letter and/or scroll. The number is dialled.
Addressbook Groups Nine groups are specified in your phone to enable you to arrange your Addressbook entries clearly. You can rename seven groups. Open Addressbook (in standby mode). Select (the number of <Groups> entries is listed behind the group name). Select group.
Phonebook Entries in the Phonebook (on the SIM card) are managed separately from those in the Addressbook. You can, however, exchange data between the Phonebook and the Address- book. New entry If the Phonebook has been selected as standard: Open Phonebook (in standby mode).
Phonebook Call (search for an entry) Open Phonebook. Select a name with the first letter and/or scroll. Phone number is dialled. Call using record no. A record number is automatically assigned to every new entry in Phonebook. Enter record number. Press.
<Special books> Open Phonebook (in standby mode). <Special books> Select. <Own numbers> Enter "own" phone numbers in Phonebook (e.g., fax) for your infor- mation. These numbers can be changed, deleted and also sent as an SMS message. <VIP numbers> Display the phone numbers saved in group.
Call records Call records The phone number of a caller is dis- played if • the caller has switched off the Hide ID function and • the network supports the "Caller Identity" function. Alternatively, a caller’s name is dis- played if it is stored in the Phone- book/Addressbook.
Time/charge You can display the charges and duration during a call. You can set a unit limitation for outgoing calls. ¢ ¢ Time/charge Select Last call: Incoming calls: Outgoing calls: Outgoing SMS: Outgoing MMS: GPRS data flow: All calls: Remaining units: Scroll through the display.
Camera Camera You can view photos/videos recorded on the integrated camera immediately and • use the photo as a background image, logo, a switch on/off ani- mation or a screensaver. • send the photo/video via MMS or e-mail. Switch on ¢...
Image resolution The image resolution quality can be adjusted regardless of the preview image resolution. Premium: 640 × 480 (VGA) High: 320 × 240 (QVGA) Medium: 160 × 120 (QQVGA) Wallpaper: 132 × 176 The resolution may decrease depend- ing on the selected digital zoom. Video mode The video mode resolution is the same as the preview image resolu-...
Inbox Inbox The inbox folder offers immediate access to the messages currently received. This means that you no longer have to look through all inbox folders for the various message types. The entries are marked with a symbol to indicate their type and sta- tus.
You can transmit and receive very long messages (up to 760 charac- ters). They are automatically com- posed of several "normal" SMS mes- sages (note higher charges). Additionally you can insert pictures and sounds in an SMS. Write/send ¢ ¢ Write message Enter text.
Page 45
Picture&sound Send pictures and sounds with or without accompanying text. Remember that these may be pro- tected (DRM, p. 13). With the text input field open: Open menu. §Options§ Select Picture&sound. The menu contains: Fix animations Fix sounds Own animat. Own pictures Own sounds Select list.
Read Arrival of a new SMS announced in the display. Use the soft key beneath to open the Reading the SMS. Scroll through message line by line. ç SMS 10.05.2004 + 12398765431 SMS text. . . Reply Reply You can answer the SMS immediately.
Page 47
Lists All SMS messages are archived in dif- ferent folders, according to their sta- tus. (For overview of message sym- bols, see p. 7): Inbox ¢ ¢ ¢ Inbox The list of received SMS messages is displayed. Draft ¢ ¢ ¢...
Setting SMS signature ¢ ¢ Message setup ¢ ¢ SMS signature You can enter a “signature” with up to 16 characters. This signature will then be attached to each SMS except for a and when changes are §Reply§ made to an existing SMS. SMS profiles ¢...
Page 49
More information on SMS SMS status report If the message cannot be transmit- ted to the service centre you are offered the chance to repeat the transmission. If this also fails, con- tact your service provider. The message only indicates sage sent! transmission to the service centre.
The Multimedia Messaging Service enables you to send texts, pictures/ videos and sounds in a combined message to another mobile phone or to an e-mail address. All elements of an MMS message are merged to form a "slide show". Depending on your phone's settings, you will receive either the complete message automatically or notifica- tion that an MMS has been saved in...
Page 51
Sounds Select. <Sound> Display sound functions: Insert sound Open list to select a sound. Record Activate sound recording to record sounds (p. 104). Also possible. Open Playback the sound. Delete Delete inserted sound. Save Save sound to use later on. Msg.
Generation options Open menu. §Options§ Send MMS Send MMS. Play Play entire MMS on the dis- play. Picture... See p. 49. Sound... See p. 50. Text... See p. 50. Page page: Insert new page behind current one. Delete page: Delete cur- rent page.
Send The page(s) of the new MMS is(are) already created and the MMS is dis- played. Open address entry. ç MMS Subject: Greetings from Munich Send to: +1234567654321 | Size: 85 KB Þ ß á Subject: Enter a brief description. Send to: Enter one/several phone number(s)/e-mail...
Sending options Open menu. §Options§ Send MMS Send MMS. Play Play entire MMS on the dis- play. Edit Display object selection to change an object. Add recipient from the cur- recipient rent address directory. Delete Delete individual recipient. recip. Add attachment: attachm.
Read An MMS has been received in full. Select the MMS. Start automatic playing of the MMS. Key functions for playback: To the next page. Press briefly once to return to the start of the current page; press briefly twice to return to the start of the previous page.
List options Different functions are offered depending on the list/situation. Open menu. §Options§ Play Play MMS on the dis- play. Edit Display MMS for processing. View Display MMS for view- ing only (write-pro- tected). Send MMS Send MMS. Reply MMS Reply to MMS immedi- ately.
User settings Set the MMS dispatch to suit your requirements: Delivery Request delivery confirma- report: tion for sent messages. Read reply: Request confirmation that the MMS has been read. Default Send priority: priority: Normal, High, Validity: Select the period in which the service centre is to try to deliver the message: Manual,...
E-mail Your phone has an e-mail program (client). You can use it to create and receive e-mails. Write ¢ ¢ Write message Enter the address data for the e-mail: Enter one or more e-mail Send to: address(es). Insert them from the Ï...
E-mail Receive/read ¢ ¢ Inbox ¢ Select function. Before an e-mail can be read, it must be retrieved from the server. You have two options: Retr. e-mail Only the message header in (p. 42) is sent. You can then decide if you also want to receive the con- tents: Open menu and select...
Most of this data has already been entered. If not, you can Inbox obtain this from your service pro- vider. See also on the Internet at: www.siemens-mobile.com/m65 Accounts Activate access Set access §Edit§ General sett.
Voice message/mailbox Voice message/mailbox ¢ ¢ Setup ¢ Voice message Most service providers provide a mailbox in which a caller can leave a voice mail for you • if your phone is switched off or not ready to receive, • if you do not want to answer, •...
Inst. message With this function you can transfer text, audio clips, pictures and files straight to and from one or more ter- minals (mobile phone, PC). This function is not offered by all service providers. Please ask your service provider about this. Your dialogue partners are entered in contact lists.
Inst. message Login ¢ ¢ Inst. message Select the last access to be used (see also Automatic login: Contact lists When the connection has been established, the contact list or the list of the contact lists is shown for selection. In the contact list, you will find a list of the most recently used contacts.
Page 64
Managing the groups Select one of the groups you set up yourself. Open menu. §Options§ Manage Select. Manage group Different functions are offered depending on the selection: Add member Add a new group member, see also Search Search for group member. memb.
Inst. message Contact list options Open menu. §Options§ Details Additional information about the contact or the group. My settings Information on your cur- rent personal status (p. 66). Manage Functions for managing a contact or a group. Contact lists Display contact lists for selection.
Options (individual contact) Open menu. §Options§ Send sound Select and send a melody/ tone from the list (DRM p. 13). Send Select and send a picture picture from the list (DRM p. 13). Send any Send any file. Details Information about the con- tact (if this is authorised by him).
Page 67
Inst. message the service provider, the settings may not be changeable. Name: Name of the access. URL: Enter URL, e.g. http:// www.abc.com User ID: Enter a non-ambiguous user (login) name. Password: Enter password (shown as a series of asterisks). My settings Information on your current per- sonal status: Alias:...
CB services ¢ ¢ ¢ Setup Some service providers offer infor- mation services (info channels, Cell Broadcast). If reception is activated, you will receive messages on the activated topics in your CB messages are displayed in standby mode, longer messages are scrolled automatically.
69; Exit browser End connection Navigation in the browser Dis- Enter URL for direct dial to an Internet address, e.g. wap.siemens- mobile.com Reload current page. Display the URL of the page currently loaded for sending via SMS/MME/ e-mail.
Display symbols in the browser (selection) Connect ² ´ Network ³ ± Enter special characters Select important special characters. Browser settings ¢ ¢ Internet Open menu. §Options§ Select. Setup Browser Set start option as well as handling of pictures and sounds plus send options.
Surf & fun Bookmarks ¢ ¢ Bookmarks Display URL/call up page List bookmarks Display list of bookmarks stored in the phone. Select bookmark. Call up URL. Save Bookmark site The current page is saved in the phone as a book- mark.
Most applications include instructions. Some applica- tions and games are already pre- installed on your telephone. You will find these listed here: www.siemens-mobile.com/m65 Requirements WAP profile (p. 69) and the access (p. 87) must be configured. Download Select the correct access depending...
Internet. Downloading or running applications will not affect or change the software already installed on your Java™-enabled mobile phone. Siemens excludes all warranty and liability claims in respect of or in connection with any applica- tions subsequently installed by the customer and any software not included in the original delivery package.
Setup Profiles ¢ ¢ Profiles Several settings can be stored in a phone profile in order, for example, to adapt the phone to the surround- ing level of noise. • Five standard profiles are provided with default settings. They can be changed however: Normal environment Quiet environment...
Rename Change personal profile (except default profiles). Car Kit If an original Siemens Car Kit is used, the profile is switched on automati- cally as soon as the phone is inserted into the cradle (also see accessories). Headset...
Themes ¢ ¢ Themes Load a completely new visual pres- entation onto your phone. At the press of a key various functions are re-organised on a topic basis, e.g. Switch on/off animation, back- ground image, screensaver, switch on/off melody, additional anima- tions.
Setup Display ¢ ¢ Display ¢ Select function. Language Set the language of the display text. When "automatic" is set, the lan- guage of your home service provider is used. If a language that you do not under- stand happens to be set, the phone can be reset to the language of your home service provider with the fol- lowing input (in standby mode):...
Timeout Set period after which the screen- saver starts. Security The phone code is requested to ter- minate the screensaver. Auto key lock Automatic keypad locking if no key has been pressed for one minute in standby mode. Unlocking: Press and hold down. Note The animated Bitmap...
Setup Dynamic light ¢ ¢ Dynamic light ¢ Select function. The LEDs on the sides of the phone are used to signal different functions visually. Show effects Switch on function. Select You can set the visual signals for the following functions: Standby Net search d Calls...
Ringtones ¢ ¢ Ringtones ¢ Select function. Set the signal tones on the phone to suit your requirements. Ringer setting On/off Activate/deactivate all tones. Beep Reduce ringtone to a short signal (beep). Silent alert To avoid the disturbance caused by a ringing phone, you can activate the silent alert function as an alterna- tive.
Setup Assign ringtone A ringtone which has already been selected will be played or the list of possible ringtones will be displayed for selection. d Calls Assign a single ringtone to all phone numbers in the Addressbook. Group calls Assign a different ringtone to each group.
Call setup ¢ ¢ Call setup ¢ Select function. Hide ID When you make a call, your phone number can be displayed on the recipient's display (depending on the service providers). To suppress this display, you can enable the "Hide ID" mode for all sub- sequent calls or just for the next call.
Setup All calls All calls are diverted. Icon in the top line of the display in standby mode. Ç Not reachable Divert occurs if phone is switched off or is out of range. No reply A call is only diverted after a delay that is determined by the network.
Phone setup ¢ ¢ Phone setup ¢ Select function. Key tones Set the type of acoustic key acknowledgement. Info tones Set service and alarm tones: Activate/deactivate tones. On/off Extended If switched on, a wider range of service tones is available, e.g.: end of menu reached, network connection interrupted.
Setup File system Format (Phonecode-protected) The phone memory is formatted and all saved data such as ringtones, pic- tures, games etc. are deleted. Clean up Creating more memory by deleting temporary files that are no longer required. Master reset Reset phone to default values (fac- tory setting).
Clock ¢ ¢ Clock ¢ Select function. Time/date The clock must be set correctly at start-up. Press. §Change§ First enter the date (day/month/year), then the time (hours/min- utes/seconds). Additional information If the battery is removed for longer than 30 seconds, the clock must be reset. Time zones The time zone can be selected in the world map or a city list:...
Setup Connectivity ¢ ¢ Connectivity ¢ Select function. GPRS (General Packet Radio Service) Switch GPRS on/off GPRS is a method for transmitting data faster in the mobile network. Use GPRS and if the network has suf- ficient capacity, you can be con- nected to the Internet permanently.
Page 88
If necessary, check with your service provider for details. You will find the current settings for the service pro- vider on the Internet at this address: www.siemens-mobile.com/customercare in the "FAQ" section. Select profile Select the profile. Confirm selection.
Page 89
Setup Fax/data Fax/data mode using a PC With the phone and a connected PC, you can transmit and receive faxes and data. Appropriate software for fax and data communication must be available on your PC and there must be a connection to the phone. Fax and data services must be ena- bled by the service provider.
Security ¢ ¢ Security ¢ Select function. Auto key lock The keypad is locked automatically if no key has been pressed for one minute in standby mode. This pre- vents the phone from being used accidentally. However, you can still be called and you can still make an emergency call.
Page 91
Setup Barrings Barring restricts the use of your SIM card (not supported by all service providers). You need a 4-digit net- work password for network barring. Your service provider will give you this password. You may need to be registered separately for each barring.
Network ¢ ¢ Network ¢ Select function. Line This function is only displayed if it is supported by the service provider. Two separate phone numbers must be registered on the phone. Select line Select the currently used phone number. Display current phone number.
Setup Your service provider is displayed: Display list of preferred §List§ networks. Create/change entry: or select an existing entry, <Empty> then select a new service provider in the list and confirm. Record new service provider (last entry in the list): Furth.network Select, enter the provider data and save it.
Headset Only in conjunction with an original Siemens headset (see accessories). If an original Siemens headset is used the profile is automatically activated when the headset is plugged in. Auto answer (factory default: off)
My menu My menu Press. Press. §My menu§ Create your own menu with fre- quently used functions, phone num- bers or Internet pages. The list of 10 entries is preset. You can, however, change it as you like. Select the required entry. Confirm.
Fast access You can assign one important phone number or a function to each of the two soft keys and number keys 2 to 9 (speed-dial numbers). The phone number can then be dialled or the function can be started at the touch of a button.
Fast access Speed dialling keys Number keys 2 to 9 can be used as speed dialling numbers for fast access. Number key 1 is reserved for the mailbox phone number (p. 60) and number key 0 is reserved for switching over two connections dur- ing use (p.
Organiser Calendar ¢ ¢ Calendar You can enter appointments in the calendar. Time and date must be set for the calendar to work correctly. The calendar offers you three views: Monthly view Special colour coding: Day with entries for appointments, day-long appointments, weekends.
Organiser Appointments ¢ ¢ Appointments Appointments are displayed in chronological order in a list. Enter new appointment <New entry> Select. Types: Memo Text input for description. Voice memo Enter voice memo. Shown with alarm. Call Enter phone number to be displayed with the alarm.
Alarm time: On/off Silent alert. Enter the period of time before the appointment and select the time unit: Minutes, Hours, Reoccurrence: Select a timeframe for repeating the appointment: No, Daily, Weekly, Monthly, Enter a parameter for repeating: Forever, Until, Occurrences is selected, certain week- Weekly days can be highlighted.
Organiser Status: Select or Outstanding. Done Priority: Select 5 levels from Lowest Use date If activated with Yes, the following time-input option is offered. Due date:/Expiry time: Enter the date and time by when the task is to be completed. Alarm: and Standard as for ments.
Dictating mac ¢ ¢ Dictating mac Use the dictating machine to record short voice memos. • Use your phone as a dictating machine when on the move. • Record a memo as a reminder or as a note for others. •...
Organiser Time zones ¢ ¢ Time zones The time zone can be selected in the world map or a city list: World map Select the desired record- ing. City list Select a city in the selected time zone. Time zone options §Options§...
Extras SIM services (optional) ¢ ¢ SIM services Your service provider may offer spe- cial applications such as mobile banking, share prices, etc. via the SIM card. If you have such a SIM card, the SIM services will appear in the main menu under "Extras"...
Extras Sound recorder Use the sound recorder to record noises and sounds for use as ring- tones. The sound recorder is usually started from other applications/func- tions such as assigning a ringtone. New recording Start from main menu ¢ ¢ Sound recorder <New entry>...
Calc. ¢ ¢ Calc. The calculator can be used in a basic version and with an advanced range of functions. The input line and two calculation lines (including the matrix with the calculation func- tions) are located in the top half of the display.
Extras Example for Velocity units: Type Units Velocity Kilometres/h, Metres/sec, Miles/h, Miles/sec, Knots, Mach Converting the units/currency Select the source unit/cur- rency. Switch to the input field. Enter the quantity to be converted. Switch to the selection field. Select the target meas- urement unit/currency.
(addresses, calendar, etc.) and syn- chronise these with the data on your phone. The data can, for example, be saved on a company computer or the Internet e.g.: www.siemens-mobile.com/syncml Synchronise §Sync§ The computer is selected and synchronisation started. When completed,...
Page 109
Extras Server sett. Providers Display the current service provider. Homepage: e.g. www.siemens- mobile.com/syncml Port: Enter port number. e.g. 80. Login: Enter user name (login name). Password: Enter password (shown as a series of asterisks). Calendar e.g., events path Contacts e.g., contacts...
Media player When you are viewing a pic- ture/video or listening to a melody, the application starts a media play- back. Browse to the next media file. – Switch on display illumi- nation. Pictures The following functions can be applied to a displayed picture: Zoom function if the dis- played picture has a higher resolution than the...
My stuff My stuff To organise your files, you can use the file system like a PC file manager. There are separate folders for the various data types in ¢ The list of the folders and files is dis- played. Navigation Select a file/folder in lists.
Page 112
Index structure Separate folders have already been created for different data types in stuff. These folders cannot be changed. Folder Description Pictures Pictures Videos Videos Anima- Switch animations tions on/off Sounds Melodies Themes Loaded theme (zipped) Theme configura- tion (unzipped) Skins Loaded user inter- faces...
You can compare and copy contacts between your phone, Out- look® and other Siemens phones (including Gigaset). SMS and MMS management (messages) You can create MMS and SMSmes- sages conveniently using your PC.
Bookmark management (browser & bookmarks) Use your PC for WAP surfing and to define your preferred WAP sites. Save the WAP addresses as book- marks on your phone so that you can quickly call them up at a later time when you are on the move.
Questions & Answers Questions & Answers If you have any questions on the use of your phone, you can contact us at www.siemens-mobile.com/customercare around the clock. As further help we have listed below some frequently asked questions and answers. Problem...
Page 116
Problem Possible causes No network connec- Weak signal. tion. Outside GSM range. Invalid SIM card. New network not authorised. Network call barring is set. Network overloaded. Phone loses net- Signal too weak. work. Calls not possible. Second line set. New SIM card inserted. Charge limit reached.
Page 117
Enter the PUK (MASTER PIN) supplied with the SIM card according to the instructions. If the PUK (MASTER PIN) has been lost, contact your service provider. Contact Siemens Service (p. 117). Check with your service provider. Check settings (p. 88). # 9 9 9 9 #...
(IMEI, to display press then §Info§) and if available, your Siemens Service customer number. Qualified Siemens employees are waiting to offer you expert information about our products and installation. In some countries repair and replace services are impossible where the products are not sold through our authorised dealers.
Care and maintenance Your phone has been designed and crafted with great care and attention and should also be treated with care. The suggestions below will help you to enjoy your phone for many years. • Protect your phone from moisture and humidity! Precipitation, humidity and liquids contain min- erals that will corrode electronic...
Product data Product data Declaration of conformity Siemens Information and Communi- cation mobile hereby declares that the phone described in this user guide is in compliance with the essential requirements and other rel- evant provisions of European Direc- tive 1999/5/EC (R&TTE). The declara- tion of conformity (DoC) concerned has been signed.
Accessories Fashion & Carry Carrying Cases A range of carry cases is available at spe- cialist shops or you can visit the Siemens Mobile Store online: Original Siemens Accessories www.siemens-mobile.com/ shop Energy Li-Ion Battery (750 mAh) EBA-660 Spare battery Travel Charger...
The power is sup- plied via the cigarette lighter socket. Optional Car Kit accessories Car Data Adapter HKO-690 Phone-in Adapter HKO-570 Products can be obtained in specialist shops or you can visit the Siemens Mobile Store online: Original Siemens Accessories www.siemens-mobile.com/ shop...
Following this six-month period, we recommend replacing your battery if you experience a sig- nificant drop in performance. Only purchase original Siemens batteries. Display quality declaration For technological reasons, a few small dots with different colours may appear in the display in excep- tional cases.
24 months of purchase, Siemens shall, at its own option and free of charge, either replace the device with another device reflecting the current state of the art, or repair the said device. In...
Page 126
• Insofar as no Guarantee default exists, Siemens reserves the right to charge the customer for replacement or repair. • The above provisions does not imply a change in the burden of proof to the detriment of the cus- tomer.
24 months of purchase, Siemens shall, at its own option and free of charge, either replace the device with another device reflecting the current state of the art, or repair the said device. In...
Page 128
Siemens Ireland Limited, Ballymoss Road, Sandy- ford Industrial Estate, Dublin 18 – The Republic of Ireland. • Any other claims resulting out of or in connection with the device shall be excluded from this Guar- antee. Nothing in this Guarantee...
While there may be differences between the SAR levels of various phones and at various positions, all Siemens products meet the legal requirements. * The World Health Organization (WHO, CH-1211 Geneva 27, Switzer- land) states that present scientific...
Page 130
SAR – European Union (RTTE) Further information: www.who.int/peh-emf, www.mmfai.org, www.siemens-mobile.com ** The CE mark confirms that the product is in compliance with the legal requirements of the European Union as a prerequisite for the plac- ing on the market and the free movement of goods within the Euro- pean internal market.
The highest SAR value for this model phone when tested for use at the ear 0.88 W/kg***. SAR information can also be found at www.siemens-mobile.com While there may be differences between the SAR levels of various phones and at various positions, they all meet the international guidelines for safe RF exposure.
Menu tree > Show entries Addressbook/ Phonebook <New entry> Business card Groups Default book <Info numbers> > Calls missed Call records Calls received Calls dialled Delete records Time/charge > URL/service provider Surf & fun Games Applications Downl. assis. Bookmarks Internet Camera >...
Page 133
Menu tree > Messages Inbox Draft Unsent Sentbox MMS templates SMS archive Text modules Message setup > E-mail WAP push Retr. e-mail Send/rec. mail CB services > E-mail > E-mail Retr. e-mail Send/rec. mail > E-mail > Text zoom > SMS profiles SMS signature >...
Page 134
> Messages Message setup > Calendar Organiser Appointments Tasks Notes Missed appts. Dictating mac Time zones Calend. setup > SIM services Extras Alarm clock Sound recorder Calc. Unit converter Stopwatch Countdown Remote sync. My stuff > Profiles Setup Themes Display >...
Page 135
Menu tree > Setup Display Dynamic light Ringtones Call setup > Own greeting Big letters Illumination > Ringer setting Silent alert Volume Calls Group calls Other calls More melodies > Hide ID Call waiting Divert Call screening Any key answ. Minute beep >...
Page 136
> Setup Phone setup Clock Connectivity Security > Key tones Info tones Automatic switch off Phone identity Memory assis. File system Master reset > Time/date Time zones Date format Time format Buddhist year Show clock Auto time zone > GPRS GPRS info IrDA Data services...
Page 137
Menu tree > Setup Security > Network > Accessories > Barrings > Line Network info Choose netwrk Auto network Pref. network Band selection Fast search User group > Car Kit Key assignm. Headset > All outgoing Outgo internat Out.int.x.home All incoming When roaming Status check Clear all...
Index Accessories... 121 Addressbook Dial entry... 33 Groups ... 34 New entry... 31 Read entry ... 33 Aircraft mode ... 74 Alarm Alarm clock... 103 Type ... 99 Alarm clock ... 103 All calls (diversion) ... 82 All incoming (barrings) ... 90 Answering service (external)...
Page 139
Converter ... 105 Countdown ... 107 Credit limit ... 39 CSD settings ... 87 Currency converter ... 106 Customer Care Siemens ... 117 Date format... 85 Default book ... 30 Delete assistant ... 83 Dialling code ... 24 Dialling with number keys ... 24 Dictating machine ...
Page 140
Joystick ... 5 Key tones ... 83 Language ... 76, 133 Limit (call time/charge) ... 39 Logo... 76 Loss of phone, SIM card ... 120 Mailbox ... 60 Maintenance of phone... 119 Master reset ... 84 Media player ... 109 Menu Controls...
Page 141
Set time/date... 85 Setup ... 73 Short message (SMS)... 43 Shown in the display ... 7 Shut down animation ... 77 Siemens City Portal ... 23 Siemens service phone numbers..117 Signal strength ... 13 Silent alert ... 79 SIM card Clear barring ...
Page 142
T9 text entry... 20 Tasks... 99 Technical data ... 120 Text entry With T9... 20 Without T9 ... 19 Text modules... 22 This SIM only ... 89 Time zones...12, 85, 102 Topics ... 75 Unanswered ... 81 Unit converter ... 105 Upper and lowercase letters (T9) ...