Maintenance & Troubleshooting; Cleaning Your Tv; Screen, Frame, Cabinet And Stand; Power Cord - LG 55LB5800 Owner's Manual
Hide thumbs
Also See for 55LB5800:
- Owner's manual (392 pages) ,
- Owner's manual (24 pages) ,
- Owner's manual (27 pages)
Table of Contents
Advertisement
22
MAINTENANCE / TROUBLESHOOTING
MAINTENANCE
Cleaning Your TV
Clean your TV regularly to keep it at peak performance and to extend the product lifespan.
CAUTION
Make sure to turn the power off and disconnect the power cord and all other cables first.
y
When the TV is left unattended or unused for a long time, disconnect the power cord from the
y
wall outlet to prevent possible damage from lightning or power surges.
Screen, frame, cabinet, and stand
To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.
To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild
detergent. Then wipe immediately with a dry cloth.
CAUTION
Do not push, rub, or hit the surface with your fingernail or a sharp object, as this may result in
y
scratches on the screen and image distortions.
Do not use any chemicals, such as waxes, benzene, alcohol, thinners, insecticides, air
y
fresheners, or lubricants, as these may damage the screen's finish and cause discoloration.
Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock,
y
or malfunction.
Power cord
Remove the accumulated dust or dirt on the power cord regularly.
TROUBLESHOOTING
Problem
Cannot control the TV
with the remote control.
No image display and no
sound is produced.
The TV turns off
suddenly.
Check the remote control sensor on the product and try again.
y
Check if there is any obstacle between the product and the remote control.
y
Check if the batteries are still working and properly installed (
y
Check if the product is turned on.
y
Check if the power cord is connected to a wall outlet.
y
Check if there is a problem in the wall outlet by connecting other products.
y
Check the power control settings. The power supply may be interrupted.
y
Check if the Sleep Timer/Off Time is activated in the TIME settings.
y
If there is no signal while the TV is on, the TV will turn off automatically after 15
y
minutes of inactivity.
Solution
to
,
to
).
Advertisement
Table of Contents
