Table of Contents
Advertisement
Auto Dry Function
1
Auto dry function can be setted/released
by manipulating indoor unit button or re-
mote control.
2
When pressing the
the function, evaporator in indoor unit will
be automatically dried as showing counting
00 to 99 on its display panel .
3
After indicating 99 on the display panel,
the unit will be automatically turned off.
* Auto dry function is released at initial
state as standard.
For Setting Auto Dry Function
If manipulating indoor unit, press the
button and
button simultaneously for 3
MODE
seconds.
If manipulating remote control for Cooling
Only model, press
The indoor unit will respond with beep once
and indicate "SC" on its display panel. Then
Auto dry function will be set.
For Releasing Auto Dry Function
If manipulating indoor unit, press the
button and
button simultaneously for 3
MODE
seconds.
If manipulating remote control, press
ton.
The indoor unit will respond with beep twice
and Auto dry function will be removed.
MODE
button after setting
button.
but-
OPERATING INSTRUCTIONS
Auto Restart Operation
When power is supplied again after unit oper-
ation has been stopped because of interrup-
tion of power supply due to outage or other
causes, auto re-operation will be performed by
remembering previous setting.
- When power is supplied, outdoor unit opera-
tion will be started within 3 minutes.
1
Auto Restart Operation can be estab-
lished/released by manipulating indoor unit
button.
* When initial state, Auto Restart Opera-
tion will be set up as standard.
For Releasing Restart Operation
Press the
,
,
taneously for 3 seconds.
The unit will respond with beep and Restart
Operation will be removed.
For Setting Restart Operation
After funtion release, Press the
(4 buttons) simultaneously for 3 seconds.
The unit will respond with beep and restart
operation will be setted.
MODE
17
,
(4 buttons) simul-
,
,
,
- Quick Links:
- Table of Contents
Hide quick links:
Advertisement
Table of Contents
