Table of Contents
Advertisement
OVER SCAN
Some video formats may require different scanning modes in order to best display the image.
HDMI, DVD/HD, SCART, VIDEO1, VIDEO2,
S-VIDEO inputs only
ON
Image size is larger than what can be displayed. The image edge will appear cropped.
Approximately 95% of the image will be shown on the screen.
OFF
Image size stays within the display area. The whole image is displayed on the screen.
NOTE: When you use a computer with HDMI out, please set "OFF".
OPTION SETTING
OPTION POWER
Allow the monitor to supply power to Option board slot during power save mode or standby
mode.
NOTE: This function should be set to ON when using power save management by slot 2 type
option.
1
AUDIO*
Selects sound input signal according to slot2 type option's specifi cations. To activate DIGITAL,
select OPTION(D) for input signal and OPTION for AUDIO INPUT.
NOTE: DIGITAL is activated only when OPTION(D) is selected for input signal and OPTION for
AUDIO INPUT.
INTERNAL PC*
1
The function is available for slot 2 type PC.
OFF WARNING
If OPTION POWER is OFF, a warning message appears when monitor power is turned off.
Note: Warning message does not appear when monitor power is turned off by OFF TIMER
setting or SCHEDULE setting.
AUTO OFF
Monitor power is automatically "OFF" when connected PC is OFF or the monitor is in power save
mode.
NOTE: Monitor power is not automatically "ON" when connected PC is ON.
START UP PC
When ON is selected, connected PC start-up.
FORCE QUIT
When ON is selected, it performs force-quit PC.
Please use this function only when the operating system cannot be shut down manually.
120Hz
(not adjustable)
RESPONSE IMPROVE
(not adjustable)
TOUCH PANEL
NOTE: Touch function does not work in PIP mode. Select the input signal as follows:
Using slot 2 type PC: Select [OPTION].
Using external computer: Select the input signal which is supplied by the PC connected to USB
connector.
STANDBY
When ON is selected, touch function is available.
PC SOURCE
Selects EXTERNAL PC or AUTO (INTERNAL).
RESET
Resets the following settings within the ADVANCED OPTION menu back to factory setting:
INPUT DETECT (except the priority of input signals), INPUT CHANGE, TERMINAL SETTING,
DEINTERLACE, COLOR SYSTEM, OVER SCAN, AUDIO in OPTION SETTING, START UP PC
in OPTION SETTING and FORCE QUIT in OPTION SETTING.
FACTORY RESET
All items are returned to factory shipment state.
NOTE: You can reset all items in all daisy chain displays. Please be careful to avoid resetting all
items inadvertently.
*1: This function depends on which option board you use.
English-27
ON
-
OFF
ANALOG
OFF
OFF
NO
NO
-
-
ON
-
-
Advertisement
Table of Contents
