Table of Contents
Advertisement
Safety Precautions, Maintenance & Recommended Use
FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE
FOLLOWING WHEN SETTING UP AND USING
THE MULTI-FUNCTION MONITOR:
•
DO NOT OPEN THE MONITOR. There are no user serviceable
parts inside and opening or removing covers may expose you
to dangerous shock hazards or other risks. Refer all servicing to
qualifi ed service personnel.
•
Do not spill any liquids into the cabinet or use your monitor near
water.
•
Do not insert objects of any kind into the cabinet slots, as they
may touch dangerous voltage points, which can be harmful or
fatal or may cause electric shock, fi re or equipment failure.
•
Do not place any heavy objects on the power cord.
Damage to the cord may cause shock or fi re.
•
Do not place this product on a sloping or unstable cart, stand or
table, as the monitor may fall, causing serious damage to the
monitor.
•
Do not mount this product face up, face down or upside down for
an extended period of time as it may cause permanent damage to
the screen.
•
The power supply cord you use must have been approved by
and comply with the safety standards of your country. (Type
2
H05VV-F 3G 1mm
should be used in Europe)
•
In UK, use a BS-approved power cord with molded plug having a
black (13A) fuse installed for use with this monitor.
•
Do not place any objects onto the monitor and do not use the
monitor outdoors.
•
Do not bend, crimp or otherwise damage the power cord.
•
If glass is broken, handle with care.
•
Do not cover vent on monitor.
•
Do not use monitor in high temperature, humid, dusty, or oily
areas.
•
If monitor or glass is broken, do not come in contact with the
liquid crystal and handle with care.
•
Allow adequate ventilation around the monitor, so that heat can
properly dissipate. Do not block ventilated openings or place the
monitor near a radiator or other heat sources.
Do not put anything on top of the monitor.
•
The power cable connector is the primary means of detaching the
system from the power supply. The monitor should be installed
close to a power outlet, which is easily accessible.
•
Handle with care when transporting. Save packaging for
transporting.
•
If using the cooling fan continuously, it is recommended to wipe
holes clean a minimum of once a month.
•
Please clean the holes of back cabinet to reject dirt and dust at
least once a year because of set reliability.
•
When using a LAN cable, do not connect to a peripheral device
with wiring that might have excessive voltage.
•
Do not use monitor under rapid temperature and humidity
change condition or avoid cold air from air-conditioning outlet
directly, as it may shorten the lifetime of the monitor or cause
condensation. If condensation happens, let the monitor stand
unplugged until there is no condensation.
•
The touch panel glass is not safety glass and is not laminated.
As with other glass, the touch panel glass may break into
sharp pieces if misused, dropped, or otherwise subjected to a
substantial shock. If touch panel glass happens to break, please
use care to avoid injury.
•
DO NOT tap the monitor with hard or pointed object, such as a
pen or pencil.
Connecting to a TV*
•
Cable distribution system should be grounded (earthed) in
accordance with ANSI/NFPA 70, the National Electrical Code
(NEC), in particular Section 820.93, Grounding of Outer
Conductive Shield of a Coaxial Cable.
•
The screen of the coaxial cable is intended to be connected to
earth in the building installation.
Immediately unplug your monitor from the wall outlet and refer
servicing to qualifi ed service personnel under the following
conditions:
•
When the power supply cord or plug is damaged.
•
If liquid has been spilled, or objects have fallen into the monitor.
•
If the monitor has been exposed to rain or water.
•
If the monitor has been dropped or the cabinet damaged.
•
If you notice any structural damage such as cracks or unnatural
wobbling.
•
If the monitor does not operate normally by following operating
instructions.
Recommended Use
•
For optimum performance, allow 20 minutes for warm-up.
•
Rest your eyes periodically by focusing on an object at least 5
feet away. Blink often.
•
Position the monitor at a 90° angle to windows and other light
sources to minimize glare and refl ections.
•
Clean the LCD monitor surface with a lint-free, non-abrasive
cloth. Avoid using any cleaning solution or glass cleaner!
•
Adjust the monitor's brightness, contrast and sharpness controls
to enhance readability.
•
Avoid displaying fi xed patterns on the monitor for long periods of
time to avoid image persistence (after image effects).
•
Get regular eye checkups.
Ergonomics
To realize the maximum ergonomic benefi ts, we recommend the
following:
•
Use the preset Size and Position controls with standard signals.
•
Use the preset Color Setting.
•
Use non-interlaced signals.
•
Do not use primary color blue on a dark background, as it is
diffi cult to see and may produce eye fatigue due to insuffi cient
contrast.
•
Suitable for entertainment purposes at controlled luminous
environments, to avoid disturbing refl ections from the screen.
Cleaning the Panel
•
When the panel is dusty, please gently wipe with a soft cloth.
•
Please do not rub the panel with hard material.
•
Please do not apply pressure to the surface.
•
Please do not use OA cleaner as it will cause deterioration or
discolor on the surface.
Cleaning the Cabinet
•
Unplug the power supply
•
Gently wipe the cabinet with a soft cloth
•
To clean the cabinet, dampen the cloth with a neutral detergent
and water, wipe the cabinet and follow with a dry cloth.
NOTE: DO NOT clean with benzene thinner, alkaline detergent,
alcoholic system detergent, glass cleaner, wax, polish
cleaner, soap powder, or insecticide. Rubber or vinyl should
not be in contact with the cabinet for an extended period of
time. These types of fl uids and materials can cause the paint
to deteriorate, crack or peel.
* The product you purchased may not have this feature.
English-3
Advertisement
Table of Contents
