Using the Energy Control
Function (Optional)
1
Turn the appliance on.
2
Press Energy Ctrl button.
• Press Energy Ctrl button repeatedly to
select each step.
NOTE
• 1 step : The power Input is decreased by 20
% compared to rated power input.
is displayed on the display screen.
−
• 2 step : The power Input is decreased by 40
% compared to rated power input.
−
is displayed on the display screen.
• 3 step (Optional) : The power Input is
decreased by 60 % compared to rated power
input.
−
is displayed on the display screen.
(1 step),
(2 step),
•
displayed on some indoor units.
( (1 step),
(2 step) is displayed on some
indoor units.)
• This function is available with Cooling Mode.
• Capacity may decrease when Energy Control
mode is selected.
• Desired temperature is displayed about 5
seconds if you press Fan Speed,
button.
• Room temperature is displayed about 5
seconds if you press Room Temp button.
24
(3 step) is
or
Using the Generator Mode
Function (Optional)
This function operate air conditioner under the
previously set power consumption.
1
Turn the appliance on.
2
Press Gen Mode button.
is displayed on some indoor units.
•
• Press Gen Mode button repeatedly to
select each step.
NOTE
• Operate the appliance by setting the set
power consumption to the value displayed on
the indoor unit.
• The Unit of the displayed value is kVA.
• 1 Step
is displayed on the display screen.
−
− The cooling capacity is approximately 60 %
of the rated capacity.
• 2 Step
is displayed on the display screen.
−
− The cooling capacity is approximately 75 %
of the rated capacity.
• 3 Step
−
is displayed on the display screen.
− The cooling capacity is approximately 90 %
of the rated capacity.
• This function is available with Cooling Mode.
• This function is disabled when you press
Mode or Jet Mode button.
• When using Generator Power Supply, air
conditioner must use 'Gen Mode'.(It may not
operate properly in Normal Mode.)
EN