LG S4NQ12JA3QJ Owner's Manual page 4

Table of Contents

Available languages

Installation

•Do not install the air conditioner on an unstable surface or in a

place where there is danger of it falling.

•Contact an authorized service center when installing or relocating

the air conditioner.

•Install the panel and the cover of the control box safely.

•Do not install the air conditioner in a place where flammable

liquids or gases such as gasoline, propane, paint thinner, etc., are

stored.

•Make sure that the pipe and the power cable connecting the

indoor and outdoor units are not pulled too tight when installing

the air conditioner.

•Use standard circuit breaker and fuse that conform to the rating of

the air conditioner.

•Do not input air or gas into the system except with the specific

refrigerant.

•Use non-flammable gas (nitrogen) to check for leak and to purge

air; using compressed air or flammable gas may cause fire or

explosion.

•The indoor/outdoor wiring connections must be secured tightly,

and the cable should be routed properly so that there is no force

pulling the cable from the connection terminals. Improper or loose

connections can cause heat generation or fire.

Table of Contents

Show Quick Links

Chapters

Table of Contents