Network And Power Supply Socket; Figure 18: Network And Power Supply Sockets - Top And Bottom; Figure 19: Connected Sockets; Figure 20: Sockets Wired To Pdu Behind Hub - NEC FA Series User Manual

Led wall bundle fine pitch led video display indoor

Hide thumbs Also See for FA Series:

Table of Contents

3.5.2.5 Network and Power Supply Socket

The Network and power supply sockets (Figure 18, A) combine power and data distribution for

each column of modules in the LED Wall. The sockets are male and female adapters at the top

and bottom surfaces of the cabinet. The sockets interconnect two cabinets of a column (Figure

19). The socket is connected to Ethernet ports (Figure 18, B) on the Hub board (D) and to the

Power distribution unit (PDU) (wiring, C).

The sockets wire to the PDU (Figure 20, E) and ground (F) on the cabinet. The PDU, in turn,

connects to the redundant Power supply units (G) via the hub board's power supply connectors

(see also Figure 26, D, p. 28).

The Ethernet cables plug into Ethernet ports on the Hub board (Figure 18, B).

Figure 18: Network and Power Supply Sockets – Top and Bottom

Table of Contents

Show Quick Links

Table of Contents

Led-fa012i2-110 Led-fa015i2-137 Led-fa019i2-110 Led-fa019i2-165