Table of Contents
Advertisement
Hanging bolt
(W3/8 or M10)
Nut
(W3/8 or M10)
• The following parts are local purchasing.
① Hanging Bolt
- W 3/8 or M10
② Nut
- W 3/8 or M10
③ Spring Washer - M10
④ Plate Washer - M10
Wiring Connection
Connect the wires to the terminals on the control board individually according to the outdoor unit connection.
• Ensure that the color of the wires of outdoor unit and the terminal No. are the same as those of indoor unit respectively.
Terminal Block Indoor
1(L)
2(N)
INDOOR POWER INPUT
WARNING : Make sure that the screws of the terminal are free from looseness.
CAUTION : The Power cord connected to the unit should be selected according
to the following specifications.
Keep the length of the bolt
from the bracket to 40mm
Flat washer for M10
False
(accessory)
ceiling board
Flat washer for M10
(accessory)
Nut
(W3/8 or M10)
Adjust the same height
Outdoor unit Indoor unit
3
4
SODU SODU
Ceiling
Air Conditioner body
Paper pattern
for installation
CAUTION : Tighten the nut and bolt
to prevent the unit from falling.
Central controller
IDU IDU
INTERNET
DRY1 DRY2 GND
Installation
False ceiling board
Set screw of
paper pattern (4 pieces)
Open the ceiling board
along the outer edge of the
paper pattern
Outdoor unit
12V
Installation Manual 9
Advertisement
Table of Contents
