Table of Contents
Advertisement
4.WITH A HIGH RESOLUTION GRAPHICS ADAPTER
Using a high resolution graphics adapter or a high resolution graphics system
(ex. 960 x 720 resolution)
1
Make sure the power to the MultiSync PLUS and the computer is off.
2
Make sure the INPUT switch on the front of the MultiSync PLUS is at "BNC".
3
Make sure the BNC INPUT VOLTAGE switch on the rear is at appropriate
position for the maximum video output voltage from your adapter. (1.0:1V peak
to peak, 0.7:0.7V peak to peak)
4
Connect the power cord and the signal cable to the MultiSync PLUS.
Use the optional signal cable or the signal cable supplied your adapter.
MultiSync PLUS
Power Cord
computer
High Resolution
Graphics Adapter
Signal Cable
5
The red BNC cable should be connected to the BNC connector "R".
The green BNC cable should be connected to the BNC connetor "G (/SYNC)".
The blue BNC cable should be connected to the BNC connector "B".
The black BNC cable should be connected to the BNC connector "CS".
For the optional signal cable, please contact your authorized NEC
Home Electronics dealer.
-14-
- Quick Links:
- Pin Assignments and Signal Levels
Hide quick links:
Advertisement
Table of Contents
