Table of Contents
Advertisement
VESA Mount on your monitor
This monitor conforms to the VESA Flat Panel Mounting Physical Mounting Interface
Standard which defines a physical mounting interface for flat panel monitors, and
corresponding standards for flat panel monitor mounting devices, such as wall and
table arms. The VESA mounting interface is located on the back of your monitor.
To mount the monitor on a swing arm or other mounting fixture, follow the instruction
included with the mounting fixture to be used. Two VESA Mounting Interfaces are
included in this model; one is located behind the monitor (see figure 1), and the other
is located under the foldable stand. (See figure 2.)
(Figure 1)
VESA
Mounting
Interface
(Figure 2)
VESA
Mounting
Interface
Caution! Please select the proper screws!
The depth from plastic back cover to the bottom of the screw hole is 8 mm.
The spec is M4 screw. To fulfil the safety requirements the monitor must be
mounted to an arm which guarantees the necessary stability under
consideration of the weight of the monitor. The LCD monitor shall only be
used with an approved arm (e.g. GS mark).
7 – User's Manual
75 mm
75 mm
Slots
75 mm
Slots
75 mm
Advertisement
Table of Contents
Troubleshooting
