NEC MultiSync LCD3090WQXi User Manual page 27
Hide thumbs
Also See for MultiSync LCD3090WQXi:
- Specifications (2 pages) ,
- Product dimensions (1 page) ,
- User manual (34 pages)
Table of Contents
Advertisement
TagA
Tile Matrix
TagB
Date & Time
TagC
Schedule
TagD
Eco Mode Information
TagE
Information
01_English
The Tile Matrix feature allows one image to be displayed over multiple screens. This
feature can be used with up to 25 monitors (5 vertical and 5 horizontal). Using Tile Matrix
requires the PC output signal be sent through a distribution amplifier to each individual
monitor.
ENABLE: Select "ON", the monitor will expand the selected position.
H MONITOR: Select the number of horizontal displays.
V MONITOR: Select the number of vertical displays.
MONITOR No: Select a position to expand the screen.
TILE COMP: Works in tandem with Tile Matrix to compensate for the width of the tile
bezels in order to accurately display the image.
Tile Comp with 4 monitors (black area shows monitor frames):
monitor1
monitor3
Tile Comp OFF
Sets the current date and time for internal clock. Date and Time must be set in order for
the SCHEDULE function to work.
Daylight Saving: For those timezones where Daylight Saving Time (Summertime)
is observed.
Programs the monitor's working schedule. Schedule the power on and power off with hour
and a day of the week. Also sets the input port. This OSD can't remove except EXIT.
Using the "SCHEDULE" function allows you to set up to seven different scheduled time
intervals when the LCD Monitor will be activated.
You can select the time the monitor turns on and turns off, the day of week the monitor is
activated, and which input source the monitor will use for each scheduled activation
period. A check mark in the box next to the number of the schedule indicates that the
selected schedule is in effect.
To select which schedule to set, use the up/down arrows to move the cursor vertically
under the number (1 to 7) of the schedule.
Use the "Down" or "Up" buttons to move the cursor horizontally within the particular
schedule. The "SELECT" button is used to make a selection.
If you create a schedule but do not want to use a power on time, select "--" in the "ON"
time slot.
If you do not want to use a power off time select "--" in the OFF time slot.
If there is no input selected ("-----" showing in the input spot) the input from the previous
schedule will be used.
The selection of EVERY DAY within a schedule takes priority over other schedules that
are set up to operate weekly.
Schedules are numbered 1-7. If two schedules are programmed for the same time, then
the highest numbered schedule has priority. For example schedule #7 will take priority
over schedule #5.
When schedules are overlapping, scheduled Power ON time has priority over scheduled
Power OFF time.
When the "OFF TIMER" is set, the "SCHEDULE" function is disabled.
Before powering off, a message will appear on the screen asking the user if they want to
delay the turn off time by 60 minutes. Press any OSD button to delay the turn off time.
Displays the estimated power saving information in watt-hours.
Provides information about the current display resolution Technical data, including the
preset timing currently being used and the horizontal and vertical frequencies is also
displayed.
Note: When connected to digital input, the OSD will show either DIGITAL(D) if a dual link
signal is detected or DIGITAL(S) if a single link signal is detected.
21
monitor2
monitor1
monitor4
monitor3
Tile Comp ON
English-21
1/25/08, 8:53 AM
monitor2
monitor4
- Quick Links:
- Quick Start
- Menu Tools
- Appendix
Hide quick links:
Advertisement
Chapters
Table of Contents
