NEC MultiSync LCD3090WQXi User Manual page 25
Hide thumbs
Also See for MultiSync LCD3090WQXi:
- Specifications (2 pages) ,
- Product dimensions (1 page) ,
- User manual (34 pages)
Table of Contents
Advertisement
Response Improve
Side Border Color
LED Brightness
LED Color
UNIFORMITY
UNIFORMITY Level
Tag8
Language
OSD H. Position
OSD V. Position
OSD Turn off
OSD Lock Out
OSD Transparency
OSD Color
BOOT LOGO
Signal Information
Resolution Notifier
01_English
Turns the RESPONSE IMPROVE function on or off. Response Improve may reduce
blurring that occurs in some moving images. When Response Improve is on, response
time is improved.
Adjusts the side black bars color between black and white. For wide aspect monitors.
Controls the brightness of the LED on the monitor.
The LED on the front can be blue or green.
This function electronically compensates for the slight variations in the white uniformity
level as well as for deviations in color that may occur throughout the display area of the
screen. These variations are characteristic of LCD panel technology. This function
improves the color and evens out the luminance uniformity of the display. Settings from
1 to 5 are available. 1 is the lowest amount of compensation and 5 is the highest.
NOTE: Using the UNIFORMITY feature does reduce the overall peak luminance of the
display. If greater luminance is desired over the uniform performance of the display, then
UNIFORMITY should be turned off.
Select the level for UNIFORMITY adjustments.
OSD control menus are available in eight languages. Press "Left" or "Right" to select.
You can choose where you would like the OSD control image to appear on your screen.
Selecting OSD Location allows you to manually adjust the position of the OSD control
menu left or right.
You can choose where you would like the OSD control image to appear on your screen.
Selecting OSD Location allows you to manually adjust the position of the OSD control
menu up or down.
The OSD control menu will stay on as long as it is use. You can select how long the
monitor waits after the last touch of a button to shut off the OSD control menu.
The preset choices are 10-120 seconds by 5 seconds step.
This control completely locks out access to all OSD control functions. When attempting
to activate OSD controls while in the Lock Out mode, a screen will appear indicating the
OSD controls are locked out.
There are three types of OSD LOCK OUT:
OSD LOCK OUT with BRIGHTNESS and CONTRAST control: To activate the OSD Lock
Out function, press SELECT, then "UP" button and hold down simultaneously. To
deactivate the OSD Lock Out, press SELECT, then "UP" button and hold down
simultaneously while in the OSD menu. BRIGHTNESS and CONTRAST can be adjusted
while in the lock out mode.
OSD LOCK OUT with no control: To activate the OSD Lock Out function, press SELECT,
then "Right" button and hold down simultaneously. To deactivate the OSD Lock Out, press
SELECT, then "Right" button and hold down simultaneously while in the OSD menu.
No controls can be adjusted while in the lock out mode.
OSD LOCK OUT with BRIGHTNESS (only) control: To activate the OSD Lock Out
function, press SELECT, then "Down" and "Left" buttons and hold down simultaneously.
To deactivate the OSD Lock Out, press SELECT, then "Down" and "Left" buttons and hold
down simultaneously while in the OSD menu. BRIGHTNESS can be adjusted while in the
lock out mode.
CUSTOM: Press RESET and EXIT to enter the CUSTOM Menu. Select ENABLE or
DISABLE for POWER KEY, INPUT SEL, HOT KEY (BRIGHTNESS/CONTRAST), ECO
MODE, WARNING (RESOLUTION NOTIFIER/OSD LOCK OUT). To Deactivate the OSD
Lock Out function, press RESET and EXIT to bring up the LOCK OUT warning.
Press SELECT, SELECT, LEFT, RIGHT, LEFT, RIGHT, EXIT.
Adjusts the transparency of the OSD MENU.
"Tag window frame color", "Item select color" & "Adjust Window frame color" can be
changed.
The NEC logo is briefly displayed after the monitor is powered on. This feature can be
turned on or off in the OSD.
Note: If the "EXIT" button is kept pressed while NEC logo is displayed, the BOOT LOGO
menu will appear. It is possible to change the BOOT LOGO setting to OFF.
Signal information can be displayed in the corner of the screen.
Signal information is either "On/Off".
The optimal resolution is 2560 x 1600. If ON is selected, a message will appear on the
screen after 30 seconds, notifying you that the resolution is not set to 2560 x 1600.
Press "Left" or "Right" to select.
19
English-19
1/25/08, 8:53 AM
- Quick Links:
- Quick Start
- Menu Tools
- Appendix
Hide quick links:
Advertisement
Chapters
Table of Contents
