Table of Contents
Advertisement
MULTI DISPLAY
ID CONTROL
Sets the monitor ID number from 1-100 and group ID from A-J. DETECTED MONITORS shows
the number of all monitors which follow in the chain with LAN.
NOTE: Group ID is made of multiple selections.
AUTO ID
When "YES" is selected, monitor ID numbers are set automatically in all monitors which follow in
the chain with LAN.
NOTE: All monitors which follow in the chain with LAN should be ON. When executing this
function while in standby mode or power save mode, "LAN POWER" should be ON.
AUTO ID RESET
Resets monitor ID number of all monitors which follow in the chain with LAN.
NOTE: AUTO ID RESET should be done when changes the number of monitors which follow in
the chain with LAN.
IR LOCK SETTINGS
Prevents the monitor from being controlled by the wireless remote control.
When ACTIVATE is selected, all the settings are activated.
NOTE: IR LOCK SETTINGS is a function intended only to the wireless remote control buttons.
This function does not lock out access to all buttons at the back of the monitor. To return to
normal operation, press the "DISPLAY" button on the remote control for 5 seconds.
MODE SELECT
Selects the mode UNLOCK, ALL LOCK or CUSTOM LOCK.
UNLOCK
All buttons on the remote control are available for normal operations.
ALL LOCK
Locks all remote control buttons.
CUSTOM LOCK
Selects which buttons to be locked from POWER, VOLUME, and INPUT button.
Except for CUSTOM LOCK settings, other buttons on the remote control are locked.
POWER:
VOLUME: When UNLOCK is selected, sets minimum and maximum volume between VOL.0 to
INPUT:
POWER ON DELAY
Adjusts the delay time between being in "standby" mode and entering "power on" mode.
DELAY TIME
"POWER ON DELAY" can be set between 0 and 50 seconds.
LINK TO ID
When "ON" selected, delay time is linked with Monitor ID. It takes more time as larger ID number.
POWER INDICATOR
Turns ON or OFF the LED located at the front of the monitor.
If "OFF" is selected, LED will not light when the LCD monitor is in active mode.
SETTING COPY
In a daisy chain scenario, select the OSD menu categories that you want to copy over to the
other monitor.
NOTE: When you use this function, monitors should be daisy chained by LAN. This function
resets to default when power is off. This function has a limit depending on the cable you use.
COPY START
Select "YES" and press the SET button to start copying.
ALL INPUT
All input terminals settings are copied when you select this item. Default is off.
RESET
Resets "MULTI DISPLAY" options back to factory settings except for POWER ON DELAY.
DISPLAY PROTECTION
POWER SAVE
Sets how long the monitor waits to go into power save mode after the signal is lost.
NOTE: When connecting DVI, the video card might not stop sending the digital data even
though the image might have disappeared. If this occurs the monitor will not switch into power
management mode. POWER SAVE is disabled when AUTO OFF or CUSTOM is selected in
HUMAN SENSING*
AUTO POWER SAVE
The monitor automatically goes into OFF at the preset time period after signal is lost.
The monitor will return to normal mode when signal is restarted.
AUTO STANDBY
The monitor automatically goes into OFF at the preset time period after signal is lost.
Press the power button to return to normal mode.
DISABLE
The monitor will not goes into OFF after signal is lost.
*1: This function depends on which option board you use.
*2: This function depends on INPUT CONFIGURATION setting.
*3: The function is available only when connecting the optional control unit.
When LOCK is selected, POWER button is locked.
VOL.100.
VOLUME (+) button and VOLUME (-) button are only available from the minimum
volume to the maximum volume you set.
When LOCK is selected, VOLUME (+) button and VOLUME (-) button are locked.
When UNLOCK is selected, choose up to three buttons from DVI1, DVI2, DPORT,
HDMI1, HDMI2, HDMI3, HDMI4, OPTION*
prefer to be unlocked.
The unselected buttons are locked. When LOCK is selected, all INPUT buttons are
locked.
3
.
English-27
1
2
2
, PRESET1*
, PRESET2*
, which you
1
-
-
UNLOCK
0 SEC.
OFF
ON
-
-
AUTO
STANDBY
10
180
-
- Quick Links:
- Wireless Remote Control
Hide quick links:
Advertisement
Table of Contents
