Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
X981UHD-2 Installation Guide
98" LCD Display
Contents:
Product Description:
Type:
Resolution:
Aspect Ratio:
FCC:
Power Consumption:
BTU's:
NOTES:
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not
intended to be a step-by step procedure for installation.
Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local
building codes. All mounts should make secure contact to wood studs.
4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally
to fill the screen using the menus (see "Aspect Modes" in menus and user manual).
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary ±5%.
Tilt Angle and Rotation:
Below is the maximum angle the monitor can be tilted. Note that the monitor can only be tilted in the landscape position.
Brightness Setting must not exceed 70
www.necdisplay.com
LCD Display
3840 x 2160
16:9
Class B
560W (max with no speaker/OPS slot)
1910.80 BTU/hour
Face Up/Face Down
NEC Display Solutions of America, Inc.
Page 1
Page 1
Page 2
Page 3
Page 4
Page 5
Page 5
Page 6
Page 7
Page 8
Page 8
Page 9
Page 9
Dimensions without stand: 86.8" (W) x 49.6" (L) x 4.3" (D)
Dimensions with stand:
Weight without stand:
Weight with stand:
86.8"(W) x 51.1"(H) x 23.9"(D)
199.7 lbs
209.9 lbs
X981UHD
Page 1 of 9
Rev 1.0
Advertisement
Table of Contents
Related Manuals for NEC X981UHD-2
Summary of Contents for NEC X981UHD-2
-
Page 1: Table Of Contents
NEC Display Solutions of America, Inc. X981UHD-2 Installation Guide 98” LCD Display Rev 1.0 Contents: Product Description and Notes Page 1 Tilt Angle and Rotation Page 1 Ventilation Recommendations Page 2 Display Dimensions Front, Top, Right Side, Left Side Page 3 Rear &... -
Page 2: Ventilation Recommendations
The ventilation space should not be covered or closed off at the front of the opening. If for some reason the opening needs to be covered, other means of ventilation will need to be incorporated into the design. Contact NEC for design review and recommendations. -
Page 3: Display Dimensions
NEC Display Solutions of America, Inc. X981UHD-2 Installation Guide 98” LCD Display Rev 1.0 Display Dimensions: www.necdisplay.com X981UHD Page 3 of 9... -
Page 4: Rear & Bottom
NEC Display Solutions of America, Inc. X981UHD-2 Installation Guide 98” LCD Display Rev 1.0 Display Dimensions (cont.): www.necdisplay.com X981UHD Page 4 of 9... -
Page 5: Display Dimensions With Stand
NEC Display Solutions of America, Inc. X981UHD-2 Installation Guide 98” LCD Display Rev 1.0 Table Top Stand Dimensions (ST-801) www.necdisplay.com X981UHD Page 5 of 9... -
Page 6: Optional Speaker Dimensions (Sp-Tf1)
NEC Display Solutions of America, Inc. X981UHD-2 Installation Guide 98” LCD Display Rev 1.0 Optional Speaker Dimensions (SP-TF1) www.necdisplay.com X981UHD Page 6 of 9... -
Page 7: Optional Speaker Dimensions (Sp-Rm1)
NEC Display Solutions of America, Inc. X981UHD-2 Installation Guide 98” LCD Display Rev 1.0 Optional Speaker Dimensions including holder (SP-RM1): www.necdisplay.com X981UHD Page 7 of 9... -
Page 8: Input Panel
NEC Display Solutions of America, Inc. X981UHD-2 Installation Guide 98” LCD Display Rev 1.0 Input Panel: Bottom Side (Rotated) Control Codes: NOTE: Contact your NEC representative for codes not listed. www.necdisplay.com X981UHD Page 8 of 9... -
Page 9: Cable Connection
All displays are set to the IP address 192.168.0.10 out of the box Communicating network PC needs to be on the same subnet as display that is being communicated with Note: Above browser control states X841UHD but is consistent with the X981UHD-2. www.necdisplay.com...