Page 1
Let’s connect you. The Telkom Easy Guide to set up your DSL Router (D-Link DSL-2750U).
Page 2
First, unpack your new router. The quick reference guide 2 external antennae Your D-Link DSL Router DSL Splitter DSL Filter 1 power supply cord 2 telephone cables 1 LAN cable...
Page 3
Connect the 12vDC power supply into your router and into a power socket. Plug the short end of the DSL splitter into the Take the grey cable and telephone jack on the wall plug the one end into red socket marked DSL of the DSL splitter and the other end into the power supply marked IN...
Page 4
Ready to go. Switch your router on by pressing the power button at the back of router. The power light will first come on red and then eventually turn green. The DSL light will come on and flash, until a connection is synced. Once synced the light will remain solid.
Configuring your router. Open your internet browser and go to: Type in admin for both the username and password. From the D-Link page that loads, click Status http://10.0.0.2 Click Login. and see whether the router is configured.
Page 6
Halfway- mark. If the router is not online and not configured Change the password to your preferred Click Next on the Time and Date page. click Setup > Setup Wizard. password. Click Next. There is no need to change these.
Page 7
Almost there... Select South Africa from the Country dropdown, Enter your preferred name for your Wi-Fi network, and Check the Summary page and click Next. and Telkom as your Internet Service Provider. Enter your password. Click Next. the username and password that were SMS’d to you and click Next.
Page 8
Last few steps. If you were accessing the router via Wi-Fi up to this Activate your internet account by opening your web Your router setup is now complete. point, you will need to reconnect to the router browser (e.g. Internet Explorer, Google Chrome) and typing Test your internet connection by going to www.telkom.co.za/verifyadsl www.youtube.com/telkom...
Page 9
No connection? Don’t panic... Plug your dongle into the back of your router.
Page 10
Setting up the Dongle. Open your web browser and go to http://10.0.0.2. Type in admin as your username and your new Click 3G Internet Setup. Click Add. password, if you changed it. Otherwise use the default ‘admin’ password. Click Login.
Page 11
Halfway- mark. Click Auto Setting. Click Apply/Save. Click 3G Internet Setup from the left hand navigation to refresh the page, and if your SIM card requires a pin, click the Pin Manage button.
Page 12
Final step. Enter the SIM’s Pin (which you will find on the Simcard holder) and click Submit.
Page 13
And just like that you are connected. If you still need help call us on 10210.