Summary of Contents for NEC NDT-43
- Page 1 DVD PLAYER/ VIDEO CASSETTE RECORDER OWNER’S MANUAL MODEL : NDT-43 Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely.
-
Page 2: Safety Precautions
Safety Precautions CAUTION: The apparatus shall not be exposed to water, CAUTION dripping or splashing and that no objects filled with liquids, RISK OF ELECTRIC SHOCK such as vases, shall be placed on the apparatus. DO NOT OPEN SERIAL NUMBER: The serial number is found on the back CAUTION: TO REDUCE THE RISK of this unit. -
Page 3: Table Of Contents
Table of Contents Introduction Operation Safety Precautions ......2 Operation with tape ..... 20-23 Table of Contents . -
Page 4: Before Use
Before Use To ensure proper use of this product, please read this Notes on Discs owner’s manual carefully and retain for future reference. Handling Discs This manual provides information on the operation and Do not touch the playback side of the disc. Hold the disc maintenance of your DVD player. -
Page 5: Types Of Playable Discs
Before Use (Continued) Types of Playable Discs Notes on Copyrights: It is forbidden by law to copy, broadcast, show, broad- cast via cable, play in public, or rent copyrighted materi- al without permission. This product features the copy (8 cm / 12 cm disc) protection function developed by Macrovision. -
Page 6: Front Panel
Front Panel 6 7 8 9 10 11 12 13 14 POWER 1. Disc Tray 6. Remote Sensor Insert a disc here. Point the remote control here. 7. Tape Compartment 2. 1 1 POWER Switches the unit to ON or OFF. 3. -
Page 7: Remote Control
Remote Control OPERATE DISPLAY Switch this unit ON or OFF. CLK/CTR Access the On-Screen Display. OPEN/CLOSE Shows you the current time or EJECT counter. Open or close the the disc tray. OPEN/CLOSE DISC MENU Tape Eject. OPERATE EJECT Access menu of a DVD disc. TV/VCR ENTER/OK Switch between your TV’s tuner and... -
Page 8: Rear Panel
Rear Panel AERIAL Connect the aerial using this jack. AUDIO IN (Left/Right) (VCR IN AV1) Receive the audio signals from an external source to VCR. AUDIO OUT (Left/Right) (DVD/VCR OUT) Connect to an amplifier, receiver or stereo system. COMPONENT/PROGRESSIVE SCAN VIDEO OUT (Y Pb Pr) (DVD EXCLUSIVE OUT) Connect to a TV with Y Pb Pr inputs. -
Page 9: Connections
Connections Caution: Connect the Left and Right AUDIO OUT jacks of the DVD Player to the audio left/right in jacks on the TV Make sure this unit is connected directly to the TV. using the audio cables (A2). Set the TV to the correct video input channel. Do not connect this unit’s AUDIO OUT jack to the S-Video connection phono in jack (record deck) of your audio system. -
Page 10: Connecting To Optional Equipment
Connections (Continued) Connecting to Optional Equipment Rear of this unit Connecting to an amplifier equipped with two chan- nel analog stereo or Dolby Pro Logic II/Pro Logic Connect the Left and Right DVD/VCR AUDIO OUT or AUDIO OUT (DVD EXCLUSIVE OUT) jacks on this unit to the audio left and right in jacks on your amplifier, receiver or stereo system, using the audio cables. -
Page 11: Before Operation-Vcr Part
Before Operation-VCR part Tuning in a video channel on your Using your VCR for the very first time Video channel (RF output channel) is the channel on Following picture will display on the TV screen when which your TV receives picture and sound signals from you have just connected your video recorder for the the DVD+VCR through the RF cable. -
Page 12: Setting The Clock Manually
Before Operation-VCR part Setting the clock Manually To set the colour system The clock in your DVD+VCR controls time and date set- 1. Press i. tings for your DVD+VCR. 2. The main menu will appear on the TV screen. 3. Press 1 or 2 to select the SYS and press 1. -
Page 13: How To Use The Main Menu
Before Operation-VCR part How to use the main menu Tuning in TV Stations Automatically This DVD+VCR can easily be programmed by using the If the TV broadcast signal is weak your DVD+VCR may menus displayed on screen. not detect the necessary information and will not be able The menus are controlled by the Remote Control to store them correctly. -
Page 14: Tuning In Tv Stations Manually
Before Operation-VCR part Tuning in TV Stations Manually In certain areas of the country broadcast signals may STATION be too weak for your DVD+VCR’s automatic tuning process to find or assign TV stations correctly. You must tune in these weaker broadcast stations man- CHANNEL/CABLE : AV P SET ually in order for your DVD+VCR to store them. -
Page 15: Changing The Order Of Tv Stations
Before Operation-VCR part Changing the order of TV Stations Deleting TV Stations After tuning TV stations into your DVD+VCR you may After tuning TV stations into your DVD+VCR you may wish to change the order in which they are stored with- wish to delete a station. -
Page 16: Before Operation-Dvd Part
Before Operation-DVD part Displaying Disc Information Initial Settings on-screen By using the DVD Setup menu, you can make various adjustments to items such as picture and sound. You can You can display various information about the disc also set a language for the subtitles and the Setup menu, loaded on-screen. -
Page 17: Language
Before Operation-DVD part LANGUAGE Progressive Scan Progressive Scan Video provides the highest quality pic- LANGUAGE tures with less flickering. Menu Language English If you are using the Component Video jacks for connec- Disc Audio Original tion to a TV or monitor that is compatible with a progres- Disc Subtitle sive scan signal, set Progressive Scan to On. -
Page 18: Audio
Before Operation-DVD part AUDIO LOCK (Parental Control) Each DVD disc has a variety of audio output options. LOCK Set this unit’s AUDIO options according to the type of Rating Unlock audio system you use. Password Area Code AUDIO Dolby Digital Bitstream Bitstream MPEG... -
Page 19: Area Code
Before Operation - DVD part DivX(R) VOD Area Code We provide you the DivX ® VOD (Video On Demand) Enter the Area Code whose standards were used to registration code that allows you to rent and purchase rate the DVD video disc, based on the list in the videos using the DivX ®... -
Page 20: Operation With Tape
Operation with tape Playing a tape , Shuttle : 5. Slow motion playback During playing back or still picture press You will only be able to load and eject video cassettes You can reach the following playback speeds. when your DVD+VCR is plugged into the mains. (REV, PB 5-, PB 1-, Still, SLW, PLAY, 2PLY, CUE) Your DVD+VCR may also playback recordings from To switch off the slow motion and shuttle, press the... -
Page 21: Quick Set Recording (Qsr)
Operation with tape Quick Set Recording ( QSR ) 7. Press PAUSE/STEP to avoid recording unwanted scenes. Press PAUSE/STEP to continue recording. Your DVD+VCR allows you to make recordings using a variety of simple methods: Tapes can be paused for up to 5 minutes; RECP will be displayed when a tape is paused. - Page 22 Operation with tape Timer recording using On Screen DATE T I M E Display PR-03 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - You may set up to seven timer record events - - - - - - - -...
-
Page 23: Timer Recording Using On Screen Display
Operation with tape Timer recording using On Screen To watch a DVD while performing a timer recording, press DVD to select DVD mode. Display (Continued) 8. Press i to set another timer record event and follow steps 3 to 7. Check that the timer event details are correct. -
Page 24: Additional Operation - Vcr Part
Additional Operation - VCR part Hi-Fi Stereo Sound System Tape Counter Memory Stop This allows you to record and playback the sound in The Digital Tape Counter can be displayed on the several different ways. Video cassettes recorded on your display window instead of the time by pressing DVD+VCR will have a normal mono audio track and two CLK/CTR on the remote control. -
Page 25: Video Doctor (Self-Diagnosis)
Additional Operation - VCR part Video Doctor (Self-Diagnosis) 1W Mode (Power save Mode) This feature informs you that there is a problem with your Set 1W ON/OFF to ON to place your DVD+VCR into an DVD+VCR. These error messages will appear on the TV economic power save mode. -
Page 26: Recording From External Components
Additional Operation - VCR part Recording from External Components Copying from DVD to VCR You can copy the contents of a DVD to a VHS tape. With this video recorder you can make recordings from an external source, such as copying from 1. -
Page 27: General Playback Features - Dvd Part
General Playback features - DVD Part Buttons Operations Discs Z (OPEN / CLOSE) Opens or closes the disc tray. X (PAUSE) During playback, press X to pause playback. Press X repeatedly to play Frame-by-Frame. DivX . / > During playback, press . or > to go to the next chap- ter/track or to return to the beginning of the current chapter/track. -
Page 28: Playing A Dvd Or Video Cd
Playing a DVD or Video CD Notes on general features: Marker Search DivX • On a Video CD with PBC, you must set PBC to Off on To enter a Marker the setup menu to use the repeat function (See “PBC” You can start playback from up to nine memorized on page 19). -
Page 29: Playing An Audio Cd Or Mp3/Wma File
Playing an Audio CD or MP3/WMA file This unit can play Audio CDs or MP3/WMA files record- Programmed Playback ed media. The program function enables you to store your favorite MP3/ WMA/ Audio CD tracks from any disc in the player memory. Once you insert an MP3/WMA files recorded media or A program can contain 30 tracks. -
Page 30: Viewing A Jpeg File
Viewing a JPEG file This unit can play JPEG files recorded media. Moving to another File 1. Insert a JPEG files recorded media. The PHOTO Press . or > or cursor (b or B) once while view- menu appears on the TV screen. ing a picture to advance to the next or previous file. -
Page 31: Playing A Divx Movie File
Playing a DivX Movie file Using this DVD Player you can play DivX file. DivX disc compatibility with this player is limited 1. Insert a DivX file recorded media. The MOVIE menu as follows: appears on the TV screen. • Available resolution size of the DivX file is under MOVIE 720x576 (W x H) pixel. -
Page 32: Playing A Dvd Vr Format Disc
Playing a DVD VR format Disc This unit will play DVD-R/RW discs recorded using the DVD-Video format that have been finalized using a DVD-recorder. • This unit will play DVD-RW discs recorded using the Video Recording (VR) format. 1. Insert a disc and close the tray, It start playing automatically. -
Page 33: Additional Operation
Additional Operation Maintenance and Service Refer to the information in this chapter before contacting a service technician. Handling the Unit When shipping the unit Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. -
Page 34: Language And Area Code List
Language and Area Code List Language Code List Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu. Language Code Language Code Language Code Language Code Abkhazian 6566 Fiji 7074 Lingala 7678 Singhalese 8373... -
Page 35: Troubleshooting
Troubleshooting Check the following guide for the possible cause of a problem before contacting service. Symptom Cause Correction No power. The power cord is disconnected. Plug the power cord into the wall outlet securely. The power is on, but No disc is inserted. Insert a disc. -
Page 36: Specification
Specification General AC 200-240V, 50/60 Hz Power requirements Power consumption Dimensions (approx.) 430 x 78.5 x 265 mm (W x H x D) Mass (approx.) 4.2 kg Operating temperature 5˚C to 35˚C (41˚F to 95˚F) Operating humidity 5 % to 90 % Timer 24 hours display type RF Modulator... - Page 37 Perth 45 Sarich Court, Osborne Park, 6017 (08) 9445-5901 For service in outer areas, please contact your NEC retailer for the address of the nearest NEC Australia Pty. Ltd. Authorized Service Centre. NEC Australia Pty Ltd 244 Beecroft Road EPPING 2121...
- Page 38 P/NO: 3834RV0045H...