Mount Flexible Arm - NEC MultiSync E224Wi User Manual

Hide thumbs Also See for MultiSync E224Wi:

Table of Contents

Mount Flexible Arm

This LCD monitor is designed for use with a ﬂ exible arm.

1. Follow the instructions on how Remove Monitor Stand for Mounting to remove the stand.

2. Use the 4 screws removed from the stand to attach the arm to the monitor (Figure F.1).

Caution: Use ONLY the screws (4 pcs) that were removed from the stand to avoid damage to the monitor or stand.

To meet the safety requirements, the monitor must be mounted to an arm which guaranties the necessary

stability under consideration of the weight of the monitor. The LCD monitor should only be used with an

approved arm (e.g. GS mark).

Additional VESA Holes for Lower Monitor Head Position

Additional 4 VESA holes are provided for those users needing a lower monitor head position than that is available from the

monitor stand in shipping conﬁ guration. The monitor stand can be re-attached by using the 4 screws to the lower position VESA

holes.

NOTE:

1. The monitor head tilt function may experience impaired operation when attached to the lower position VESA holes.

2. The monitor head pivot function should not be used when attached to the lower position VESA holes.

4 Screws (M4)

Max Depth: 12 mm (E224Wi)

100 mm

Weight of LCD assembly: 3.9 kg (E224Wi)

Figure F.1

10 mm (E243WMi)

English-11

Thickness of Bracket (Arm)

2.0~3.2 mm

4.3 kg (E243WMi)

Additional 4 VESA

Table of Contents

Show Quick Links

Table of Contents

Multisync e243wmi